Hello
I need some advice on FOTA via BLE on the nRF54LM20B. I managed to get FOTA working to upload an updated image via BLE, but after a reboot, the new image doesn't load...
I am using the nRF5340 development board to program the LBS example from the NCS SDK2.7. After system-off, the current is still several tens of microamps, which differs from...
When trying to add the device to the Nordic Cloud Device Management interface, I get the following error.
"There was an error adding your device: No device found for this...
Hi,
I am using the heart rate sample.
I have connected ground to ground, 3.3v to vdd, SDA to pin 26 and SCL to pin 27. I have 4.7k pullup resistors on SDA and SCL. When...
Hi,
I am developing a custom PCB based on the nRF52840 and am currently trying to flash/debug it using an nRF52840-DK (PCA10056) as an external debugger.
connected devices...
So I have two questions. My first is on the impedance matching network on different pcb stackups. So wouldn't I need a different matching network for a different pcb stackup...
We use the NRF Mesh Android Library (and are developing with iOS version as well). An issue that we are running into on a small number of devices is that the library things...
Hi there!
I'm trying to run the 2014 arduino example code on a Teensy3.0 arduino variant. I need to know if the example file will run on the ARM core.
Right now I'm...
Hello,
I use PCA10001 v1.0(nRF51822 QFAACA).
But, S120 example is supplied with "nRF SDK v5.1" which support only PCA10001 v2.0 over.
When I tested S120+"nRF SDK...
Hi developers,
I am having a strange problem:
My nrf51822 will only start-up when USB-powered.
From no power state (battery removed and usb-disconnected):
---When...
I do not have a product (i.e. I didn't by any of the boards from Nordic) but we've built our own board using NRF51822. How do I get access to SDK/API files? The SDK is locked...
Hi,
I have Bluetooth4.0 modul and I want my dongle working just like a bluetooth adapter on my PC. that is to say: my dongle searching BLE device automatically and connecting...
Hello
I need help with 128 bit UUID for BLE.
Could you explain me how to specify my own 128 bit uuid?
Whether it should be unique?
Bluetooth specification refers to...
I am planning to write a simple OS for nRF51822 based on framed loop principle.
Nothing fancy, just bog standard 10mS frame and optional round robin scheduler.
The questions...
Hello,
I am designing a circuit using the nRF81522 chip.
I was wondering what should I do with the unused I/O pins.
Would it be OK to leave them unconnected, or there...
Hi
Could I use 3.3V to the C3 capacity in the application example,datasheet?That is to say,C3 doesn't connect to VDDPA pin and 3.3V connect to the C3.I found that it is...
We have developed our custom nRF8001 board and connected with Arduino UNO bord. we have used nRF HRM demo application from Github . We are using nRF utility application from...
OK, I didn't read enough fine print before I plunged in, but my version of the nrf51822 I have on a bunch of boards isn't supported by the new SDK.
In a premature onset...
I'm trying to use notifications with Android 4.4. When my service issues a call to sd_ble_gatts_hvx, the result is BLE_ERROR_GATTS_SYS_ATTR_MISSING.
From this link , I...
Hi
when i call twi_master_transfer function in for(;;) loop of file ble_app_hrs project.
Kindly tell me what to do for that.
for (;;)
{
for(i=0;i<10;i++)
{
...
