Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Control PWM in MCUboot 0

To output PWM signal as early as possible after powering on the NRF5340DK, I added the same code in mcuboot/boot/zephy/main.c and mcuboot.overlay as in the app core. This...
20 views

0 replies

Started 2 hours ago
by bf-wei
Not Answered
Power on current -Q (NRF52840) 0

We are investigating why the power-on current is high (1.2mA) on the failed board (using NRF52840). We found that the DCC pin behaves differently. The DCC pin is continuously...
18 views

0 replies

Started 3 hours ago
by Steven Wen
Not Answered
CHIP tool can not send command when OTBR and Ubuntu PC(within CHIP tool) restart 0

Dear sir: When I first use CHIP tool in my Ubuntu NB, I can commission bulb(52840) through OTBR(Pi4+52840 RCP) successfully, besides, I can user CHIP tool to control bulb...
19 views

0 replies

Started 3 hours ago
by susepc
Not Answered
Question about nRF5340 Partitioning 0

I'm new to nRF5340 development, and I'm reviewing partitioning for multi-image DFU. I've enabled the bootloader with CONFIG_BOOTLOADER_MCUBOOT=y , and after checking partitions...
20 views

0 replies

Started 4 hours ago
by giun.kim
Not Answered
Regarding the I2C (TWI) clock in nRF5340. 0

Hello, I am using the following device and development kit: Device: NORA-B106-00B (nRF5340) nRF Connect SDK: 2.0.2 Currently, to ensure that the connected...
- software
- Evaluation
- twi
- nRF5340
28 views

0 replies

Started 4 hours ago
by sst_S.Sakamoto

Recent in Nordic blog

Accessing the SoftDevice API from Python with pc-ble-driver-py

Carles

A new tool from Nordic has been released, pc-ble-driver-py, which allows Python developers to access the full SoftDevice 2.x.x API from a Python application. Update: Raspberry Pi unofficial build available…
- 23 Jun 2016
NFC tag antenna tuning

FormerMember

NFC principle A NFC system consists of two devices, an active and a passive device. The active device is powered, and induces a magnetic field with a coil inductor antenna. When the passive device is placed…
- 20 Jun 2016
NRF52 debugging with QtCreator on Windows

Globuloz

Hello I succeeded to configure QtCreator toolchain to compile and debug my NRF52 board. So I wanted to share. I use my own Makefile to compile everything so I will focus here on how to run a debug session…
- 17 Jun 2016

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021