Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Does nRF7002 support Wi-Fi roaming? 0

Hello, I am testing nRF7002DK board using nRF Connect SDK. Does nRF7002 support Wi-Fi roaming such as 802.11k, 802.11r, 802.11v? If it supports Wi-Fi roaming, please...
9 views

0 replies

Started 58 minutes ago
by seongbin
Not Answered
Using the button on a XIAO nrf52840 board? 0

I have a XIAO nrf52840 board . It has a button which does two things: one click seems to reboot the nrf52840 and double click enters bootloader mode. I'd like to override...
13 views

0 replies

Started 1 hour ago
by Oli
Not Answered
Immediate disconnect triggered upon connection in peripheral role from hci_hardware_error 0

NCS 2.8.0 Ble device acting as both central and peripheral. CONFIG_BT=y CONFIG_BT_LL_SOFTDEVICE=y CONFIG_BT_DEVICE_NAME_DYNAMIC=y #for cenral devices these are set....
11 views

0 replies

Started 3 hours ago
by Anthony Ambuehl
Not Answered
nRF5340, nRF7002, XIP, MCUboot, filesystem -> Any examples? 0

Hello, I am attempting to configure the following setup to support (with an nRF5340 + nRF7002-EK)... 1. nRF7002 on SPI w/ TLS, STA, and FW patches offloaded to QSPI...
17 views

0 replies

Started 5 hours ago
by khelmutlord
Not Answered
Multiple MEMS microphones I2S etc 0

Hi! I need to do audio direction finding on the device. I2S samples support only 2 channels? I tried to figure out if the upcoming nrf54h20 had i2s interfaces, but there...
14 views

0 replies

Started 5 hours ago
by Elppu

Recent in Nordic blog

Driving WS2812B LEDs using I2S on the Nordic nRF52832

Mahesh Venkitachalam

In this article, I use the I2S peripheral of the Nordic nRF52832 to generate the waveforms required to drive the popular WS2812B RGB LEDs. http://electronut.in/nrf52-i2s-ws2812/
- 18 Aug 2017
Walkthrough of Nordic Thingy:52 Node.js Raspberry Pi demos

gamnes

Thingy:52 Node.js Raspberry Pi Interface This blog post is a follow up to the Nordic Thingy:52 node.js/Raspberry Pi demos blog post, and will described how you can run and what to expect from each of…
- 17 Aug 2017
ble_app_hrs_freertos running in Atollic TrueSTUDIO

jmag999

This post describes how you can get the ble_app_hrs_freertos example project running in Atollic TrueSTUDIO 8.0 on a pca10040 board. This is a managed make build, it does not rely on the makefile provided…
- 14 Aug 2017

Latest guides

Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021
Peripherals And RF Test: Adding a Peripheral(SPI) to an NCS (version 1.x) Zephyr project

Jeff4BLE

Objectives Provide a brief primer to NCS and Zephyr Provide a quick-start guide to adding peripherals to an existing sample project Demonstrate running both foreground and background tasks within Zephyr…
- 21 Feb 2021