Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
When using external flash, calling Device_is_read returns a failure 0

Hi: I use ncs v2.8.0, using external flash(w25q128). this is test flash project. And this log: Device_is_read returns a failure. But flash read/write successful...
9 views

0 replies

Started 1 hour ago
by john.liu
Not Answered
Sniffer fails to catch packets when running radio_test. 0

Hello, I wanted to verify if two devices are communicating by using a sniffer. After running the radio_test example, I set up parameters for each transmitter and receiver...
15 views

0 replies

Started 5 hours ago
by kim_mj
Not Answered
upgrade ncs from v2.6.0 to v2.9.0, building gets errors 0

hello, my code was built under ncs v2.6.0 and tool chain 2.6.0 without issue, I upgrade them to v2.9.0, then I get these errors, can not figure out how to fix them. could...
11 views

0 replies

Started 6 hours ago
by danny0007
Not Answered
Fuel Gauge Battery Profiling Configuration 0

Hi, I'm new to fuel gauging and battery profiling and am trying to understand the process and the parameters used. Is there a description of how a battery model is created...
17 views

0 replies

Started 7 hours ago
by ralphjy
Not Answered
NRF24L01+ media utilisation - actual on-air time for a packet, 9 bits per byte transmitted? 0

Working to comply with EN 300 328 V2.2.2 by reducing Media Utilisation to <10% on my FHSS system. I've been told that over-the-air, the NRF24L01+ actually transmits 9 bits...
20 views

0 replies

Started 13 hours ago
by Phil_G

Recent in Nordic blog

nRF5x-Tools and nRF5x-Pynrfjprog Includes Linux and Python 3 Support

gamnes

Over the last few weeks the Nordic team has been working on getting support for programming our devices in Linux as well as adding support for using our Python programming module ‘Pynrfjprog’ with Python…
- 27 Oct 2015
nRF51 DFU command line OSX app (sample)

jeremysf

OSX command line application for performing an nRF51 device firmware update: https://github.com/jeremysf/nrfDFU This is a simple command line program I wrote based on Nordic's documentation and their…
- 27 Oct 2015
Developing Nordic nRF51822 Beacon Kit Firmware with Visual Studio

ivan

This tutorial shows how to build and debug Bluetooth LE beacon firmware for the nRF51 Beacon Kit. We will use Segger J-Link together with a Tag Connect cable to debug the beacon. We will show how to use…
- 27 Oct 2015

Latest guides

Software and Protocols: Automating nRF91 TLS credential management via serial port AT commands

Daniel Veilleux

I have spent a bit of time recently experimenting with different TLS credential configurations using nRF91-DKs. Eventually I got to the point where I wanted to do things like swap out the certificates…
- 10 Jan 2020
Getting started: nRF Connect for Cloud Certificate Update

Joakim

The content of this guide is now covered in the documentation on nrf Connect SDK documentation page.For the most up-to-date instruction to Update Cloud Certificate please follow this link.
- 27 Sep 2019
Getting started: Thingy:91 Firmware Update using MCUboot

Joakim

The nRF Connect Programmer application now also supports MCUboot! Follow these steps to update through the programmer application or the following guide for the command line alternative. This guide shows…
- 23 Sep 2019
Bluetooth low energy: Concurrent Advertising

Håvard

I have been asked several times about variations of the following advertising scenario, so I decided to make a blog post that I can refer to, and hope it might prove useful for others out there that are…
- 9 Sep 2019
Software and Protocols: The four kinds of data you need to consider when developing an IoT product

Markus Tacker (he/him)

In this post I will give you an introduction to the four kinds of data you need to consider when developing an IoT product: Device State Device Configuration Past Data Firmware Updates It's these …
- 9 Sep 2019
Getting Started : Automate building of HEX files for your nRF Connect SDK application using CircleCI or GitHub Actions

Markus Tacker (he/him)

Continuous delivery is in important aspect of short time to market and since the nRF9160 supports firmware over the air updates we want to ship a new firmware to our development boards every time we update…
- 14 Aug 2019