Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
I have been trying to get MQTT+TLS to work on the nRF7002 DK and haven't been able to get the samples to connect to the MQTT Broker.
Is there a working MQTT TLS example...
Seeing the failure below and wondering a couple things:
How did the device get into this state?
How do I disable AP protection? The Kconfig GUI seems to indicate that...
Hi all,
I'm working on a custom board based on the nRF9160 and using nRF Connect SDK v3.0.2. We’ve developed the board in-house and integrated the npm1300 PMIC as part of...
Hello,
For our emission tests in an anechoic chamber we need to be sure that the BT antenna is up and running. Of course we cannot connect via BT from outside the chamber...
hi support team,
docs says we can program 54l15 external spi flash ,please refer to : https://docs.nordicsemi.com/bundle/nrfutil/page/nrfutil-device/guides/programming_external_memory...
Hi Team,
We are using MBN52832 Murata module in our ongoing project.We need technical support from the team.
We need hardware integration (connection) support from the...
Every once in a while I am experiencing the soft device error NRF_FAULT_ID_SD_ASSERT.
In this post I saw that you may be able to provide some information on what is going...
Hello everyone,
I work with a custom board with the nRF52840 chip on it. We have pressure, humidity and temperature sensor and accelerometer sensor on the board. We need...
Hi,
We have a product that have a BLE capability (not by Nordic) and already have a mobile app that works with it.
I am developing now the FW for the upgraded version...
Hi devzone-team,
my application (custom board with nrf52840, sdk 16.0.098 ) uses 12 timers and it's organize in the 3 parts: uart, a pwm-bus ( proprietary) and ble-scan...
hi,
my application use boot and soft device.
Is possible with the application erase only the customer register in UICR ? (of course switch off the soft device)
This...
My company is using nrf52832 and our certification agent (we will apply for CE Red and FCC for our device) is wondering if the chip manufacturer is a SIG member, otherwise...
Hello I am new on KEİL and NRF52832,
I am trying to merge this custom service and Ble_app_gls example . I added custom services libraries to ble_app_gls example ,I added...
Hi,
I want to set a custom value to my Gatt characteristic value. I can do this by writing to the characteristic in my app or the NRF_connect application.
What I want...
Hi,
I am using sdk15.3 for a project, the uart works fine when programmed without bootloader, but just after add bootloader, the uart is not worked now, also the rtt log...
Hi all, This just works in other compilers. I'm new to Nordic/Segger and have tried all variations of parenthesise, ## macro expansion. It's got to be something simple! #define...
I have a firmware developed on the nrf52840 development board. When porting it to nrf9160, a lot of errors were reported. How can I use the LOG output function on nrf9160...
