Hi All,
I am working in the sleep mode with system off and wake up with internal RC clock.
It function well when connected to EV board...
I see the "Emulated System...
I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hi,
I'm trying to implement the following use case:
On the first button push a sensor advertise and bonds with a smartphone. I do it the following way and it works fine...
I tried to configure OTA in my application, but nrf toolbox stucks in "enabling dfu bootloader" and I can see "Starting DFU" showing up really fast, can it be a problem with...
Edit : I solved the problem. The problem was related to variable declaritions and pointer. None of the commands was not working except Write Register and Read Register. I...
Hello. For my application, I have written several functions related to sensor interrogation and work with some periphires of the controller nRF. I split these functions into...
Hi, I started development using a custom board with nRF52840 QIAACO. 1. The prototype uses Holyiot-18010 module ( listed on Nordic 3rd party modules). 2. I am using supply...
Hello. I am using the nRF51 Development Kit which is working well. I am using the examples\ble_peripheral\ble_app_uart sample project as it seems to have the features that...
Hi
I have an external board featuring an nRF52832 connected to the nRF52DK via the Debug Out port on the DK and a 6 pin connector on the external board. I can program the...
Dear Expert,
I use this URL to learn micropython on nRF52840.
https://github.com/micropython/micropython/tree/master/ports/nrf
but I want to use SD card function which...
I think I had this working earlier, but when I upgraded to nRF Connect 2.5, now when I select my trusty PCA10000 (nRF51822 dongle), I see all the proper initialization whiz...
Hi,
I'm having difficulty getting the ble_app_blinky_c example in nRF5_SDK_15.0.0_a53641a to compile for the the nRF52840 (pca10056). I'm getting the following errors
...
I've installed the Segger Embedded Studio and Nordic SDK (C:\Nordic\nRF5_SDK_15.1.0) following the tutorial video on the nRF5 webpage.
Right out of the box, trying to Build...
I am designing a simple broadcaster using an sma connector for a dipole antenna.
I have added a 50 ohm SMA connector to the reference deign
.
so you can see above...
Working with the pca10056 pdk board I used nrfjprog --readqspi which works just fine but the intel hex records start at 0x1200. Im curious as to why?
The extended address...
Hi,
I'm trying to understand mouse_movement_send() function in HID mouse example. Can you please explain what is exactly happening inside this function?
I also didnt understand...
