Has anyone experience of successful TICK_DV calibration for nRF9E5? What order of accuracy should be achievable?
In my application I maintain a software RTC clocked by...
Hello,
I manage to work with new S310 V2.
I use S310 for hrm only. Saying so also not for DFU service.
I have own proprietary method for transfering application images...
I am working on an application and need to get the exact time that the master node receive advertising from the slave node. I tried with PPI and it's ok to capture the Radio...
Hi, could you please tell me if my assumptions below correct?
Measuring a (ratiometric to VCC) analog signal and selecting VDD_1_2_PS as the reference selecting AIN_NO_PS...
When I initialize the SoftDevice with SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false); // Sets up Crystal Source to 20ppm 32.7628kHz
The project I based...
I am trying to make a product with NRF8002B. I finally have the product prototyped. The user will connect to the device, beep, light up, and track. It will always stay on...
I am working with an older version of the https://github.com/NordicSemiconductor/nRF-IEEE-802.15.4-radio-driver and the https://github.com/NordicSemiconductor/nrfx . Which...
Hi
Apart from Direction finding, there is 3 major enhancements in the Bluetooth 5.1 core spec.
Reference: www.bluetooth.com/.../1901_Feature_Overview_Brief_FINAL.pdf ...
I search for an LTE modem for a small device. (between 10000 or 100000 parts per year)
So I need something to play with it to learn what is possible. (for example battery...
It's not clear to me the difference between RAM[n].POWER, RAM[n].POWERSET and RAM[n].POWERCLR. I'm assuming that you use RAM[n].POWER to read the contents of the registers...
Hello,
The following defines can be found in nrf52_bitfields.h. Are all these register values used for REV 1 chips? In otherwise, the last digit isn't significant? If...
I am using the example project for Uart Central. I have a lot of messages transmitted out of the Uart. Unfortunately the Uart transmits some characters but does not transmit...
We are consistently seeing a BLE disconnection after being connected to an iOS device for 40 seconds. On the iOS side, the log output at the time of disconnection says: "...
Hello,
I would like to know if someone has experience with embedding lua script language (not elua) on a nrf52 kit, with SES or other IDE.
Or is there some nice tutorial...
Hi, I am learning how to merge two files together to be able to transmit temperature data via UART. These were the steps I have undertaken to do so:
1. Copy pasted the function...
Hi i am new to learning Nordic SDKs and I am working on adding custom commands to a BLE example using Nordic UART Service ( here ). I tried to apply this concept over to the...
I sent the AT instruction back correctly with the serial tool sscom5.13.1
I sent the AT instruction error with the secondary function: at_cmd_write ("AT-CGDCONT?," buf,...
1. When using SEGGER Embedded to use Chinese comments, the cursor display will appear abnormal lying each time Chinese characters will move the cursor only half a character...
This is a voltage drop of 3.3V to ~450mV before decaying.
I'm using P0.02 (AIN0) on the nRF52840 on a custom board. This is my config:
My handler function is never being...
Hi,
I am working on handling multi-radio protocols like only 1 radio at a time. ( https://devzone.nordicsemi.com/f/nordic-q-a/63194/when-the-timeslot-extension-could-be...
Hi,
I am trying to disable writes to certain regions of flash memory. But different from the nRF52840 Product Specification, NRF_ACL is missing the DISABLEINDEBUG register...
