Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
Good afternoon,
I am able to write data using polling mode with the macro NRF_SERIAL_CONFIG_DEF(serial_config, NRF_SERIAL_MODE_POLLING, NULL, NULL, NULL, NULL). I am using...
Hi together!
Ist it possible to send a CR (Carriage Return) over the programmable UART Buttons?
When yes, what is the Syntax for?
For example, i need to send such a...
Hi
I used nrfutil.exe (v3.5.1 based on python v2.7.13) to create bootloader.zip file from SDK v15 - \dfu\secure_bootloader\pca10040_ble\ sample code.
CMD : nrfutil.exe...
It appears as if the LFCLK is not calibrated to 500PPM accuracy. I display the time in the system and every 60 seconds it falls 2-3 seconds later relative to the clock on...
nRF52832 / SDK V15.0.0 / nRF connect / DFU OTA Buttonless
Hello,
My device name is 21 chars but it is truncated and appears as 20 chars in nRF Connect "Discovery devices...
We are using an nrf51822 processor, running off of 2.7 volts from a switching power supply, powered with 12.4volts. The processor has simple gpio connections, and a battery...
Hi,
The structure nrfx_spim_xfer_desc_t contains both tx_length and rx_length fields.
Is there a situation where tx_length != rx_length ?
Thanks,
Daniel
I have a nicely working application that occasionally hangs. I have managed to trap a "hard fault" under the debugger (using VS with GCC). I have the system halted with the...
hello, Nordic developers!
I needs help develop rnf52840.
Goal
My goal is ble & 802.15.4 mutiprotocol, not using zboss network.
Actually, It is the same situation as...
Hello,
I am in the process trying to send multiple packets over ble but cannot seems to figure out this UART example.
I have read many posts that use ` ble_nus_string_send...
My understanding is that the nRF52840, which is the only nordic device to support the long range bluetooth physical layer. Additionally this chip requires SoftDevices 140...
Good day,
We are planning in developing our own custom-made nRF52840 PCB using the reference schematics provided by Nordic Semiconductor.
In the initial phase of our...
Hi,
This is more of a bug report than a question, but not sure how to get in touch with engineers outside the forum.
In app_util.h (Using SDK 12.3.0) there are two...
(nRF51 SDK v12.3.0)
The function gcm_init() in gatt_cache_manager.c (BLE Peer Manager Lib) calls ble_conn_state_user_flag_acquire() part of the BLE Connection State Lib...
