Hi,
I'm trying to build nmea parser, so I have a functionc hecking all nmea sentences and trying to get double value, but I always go bad double value. For example here...
Hi
I am trying to setup and test the OpenThread CSL feature on nrf52840DK with OpenThread daemon and RCP mode nrf52840DK.
I found there is a way to build the Daemon for...
Hi,
With several nrf52840 based prototypes, I had serious problems. I could see them die after flasing them a few times. And this was not just one dying, it was all of them...
hello all,
I'm fairly new to nRF SDF and its build environment. I browsed a lot of posts but did not find the solution to what is probably a basic misconfiguration error...
Is a common ground required when measuring current in current meter way?
Can externally supplied voltage exceed 5V? Will this cause inaccurate test results?
I'm working with nRF5340 and nRF Connect SDK 2.9.0, using sysbuild and Partition Manager for my project. I want to enable Zephyr's coredump feature and store dumps in internal...
I have a custom NRF9151 board with Windbond W25Q32JV flash, and some other peripherals connected. It also has GPS and LTE which I have tested and work. My UART console is...
I am using nRF5_SDK_15.0.0_a53641a.zip to create an application needs paring and bond. Now I got a problem that, if a smartphone removed the bond manually in its phone settings...
Hi
I’m using NRF51822_XXAC + s130_nrf51_2.0.0_softdevice, my program work well most of the time, but it dies at 0x000006b0 sometimes. Since I used the S130 softdevice, the...
Hello, guys,
I develop 52810 with sdk 14.1.0, i need the OTA features,
but i couldn't find the dfu demo( ble secure dfu bootloader and
buttonless dfu template app , pca10040e...
Hello,
As we know that nRF52840 SoC supports Bluetooth 5's 4x Long Range and 2x Data Throughput.
How different PHYs for these features (2 Mbps PHY and 1 Mbps Coded PHY...
Hi,
I am using nRF52832 to design a mesh system, starting with light.
Everything is fine, and development is reaching the end.
Before today, I use only one model,...
Hi there!
I had some great help on my last article about getting started. I'm now using Segger Embedded Studio and the nRF SDK Version 15.
Before I get too deep into BLE...
I'm developing multiple peripheral and a central. Central is only scanning and Peripherals are only advertising.
In the example, I see that I should use the ble_app_blinky...
I get a BLE_HCI_CONNECTION_TIMEOUT error when I use NRF connect to connect to my dev board only when my dev board is using SD 6.1.0.
Once I get the error I have to reset...
Hi, I am new on BLE development and a bit confuse on choosing development kit. After search around, I learned the following, please tell me if any wrong:
Segger JLink...
I am trying to debug the DFU in IAR. I realize I will have to turn optimization off and grow the flash size in the linker file. However, when flashing as is I get the following...
Hi, Nordic Team
My development environment is PCA10028, SoftDevice 130, SDK12.3.0
I am developing a multi role.
#define CENTRAL_LINK_COUNT 7
#define PERIPHERAL_LINK_COUNT...
SDK version: 14.2.0
I use "ble_app_hrs_freertos" as code base and modify it to create a "ble_app_template_freertos" project.
" softdevice_task " is already in this project...
hello,
For now, I have to power cycle my board or manually send "nrfjprog -f NRF52 --reset" to start the application firmware after download. I would like the application...
Hi all,
I'm trying to combine the BLE NUS central with USB CDC functionality.
I have copied over functions from the USB CDC ACM example into the BLE_APP_UART central example...
