I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi,
I would like to check my understanding of PSM. Currently, using the AT Client on the local NB-IoT network, I can see that the device is entering PSM after 3 minutes...
Hi, I'm looking for a simple example on how to implement I2C. I've built I2C on my various FPGA's, implemented I2C on various AVR based chips from special function registers...
Good afternoon,
I first devoloped my app based on the nRF52840 (SDK 15.2; S140 V.6.1.0) and it was perfectly working with or without bonds.
After that, and following what...
I've been doing some development on the nRF Mesh platform for the nRF52832 chipset and I'm relying on the Mesh DFU protocol to update my deployed units. Recently I've been...
We need to know what the total internal capacitance and inductance is for the nRF9160 SIP to comply with intrinsic safety certification. Can anyone point me to this information...
Hi, We have developed a custom board. We can upload code using nrf52840 sdk-ble stack. We can read NRF_LOGS. However when we test with the ble_app_blinky that works fine with...
We have been using gpiote low_accuracy port events on battery powered devices for years without any issues, but now we bumped into a strange issue.
Details: 8 PORT (hi_accuracy...
I have set the host name to my aws thing endpoint name per the instructions on the following link
developer.nordicsemi.com/.../README.html
but the hostname ends up...
To the kind attention of Nordic support team,
after about one year evaluating software using Segger Embedded Studio I'm switching to Keil, basically to evaluate gazell secured...
Hi
I have lost my private key for generating my dfu pakage using nrfutil.
I have 2K nrf Modules chips already programmed with bootloader & dfu enabled firmware. However...
Hello,
I'm having a weird problem while doing a communication between nRF52840( perpherial device ) with USB OTG ( STM32 ).
I'm trying send out the data from USB OTG...
Hi,
We have a production device using the NRF9160 and after several days end up triggering a __bus_fault() that arises likely from memory fragmentation in the heap within...
Hello all.
i am trying to flash a boot loader with arduino IDE. i got the technique from here : https://github.com/sandeepmistry/arduino-nRF5
after doing all steps i am...
We upgrade to the latest Mesh SDK 4.0 but the light server example is behaving differently. We have our own code from an iOS app that provisions the device.
After I provisioning...
Using 840DK and latest Segger (4.42)
Building Mesh DFU example: dfu_nrf52840_xxAA_s140_7_0_1
Latest Mesh SDK v4
Latest SDK 16
Build with no errors, when starting debug...
