Due to production requirements, I need to obtain the device's QR code. However, I found that the QR code can only be retrieved using the code snippet below after calling Nrf...
I am trying to create a custom sensor for CT1711 temperature sensor. I have created the sensor driver code and device tree binding, but it won't start (initialize) and the...
Hi,
Is it possible to make the MQTT connected device receive the Shadow config updates and AT Commands immediately? Based from our testing, the device only receives the...
Hi Nordic Support Team,
I'm currently experimenting with Channel Sounding using a couple of nRF54L15 boards.
I am trying to obtain raw I and Q samples so that I may analyze...
Hello,
currently i am configuring the networking stack on my project.
The goal is to use Matter's built-in Thread connection, to establish a Secure CoAP connection. I...
We use several Nordic chips in our BLE sensors. We bond to the devices from Android, connect to update configurations, then disconnect such that the device then advertises...
Hi,
I'am actually trying to develop a BLE based remote, with NRF52832, S132.
This remote must be configured by a smartphone (the remote act as peripheral) and be able...
Hello everyone,
I have a problem with the power consumption of the NRF52 during TWI operations with tw0 HTU21DF temperature and humidity sensors.
I am using NRF52832...
Hi,
I'm using nRF sniffer 2.0.0-1.beta , which is already a big improvement compared to v1.0.1, but it seems it can only decode small MTU (BLE 4.1) packets.
CRC is always...
Hi!
I would like to generate a dfu bootloader binary image that is not too big and I found the work around for the issue here: https://github.com/NordicSemiconductor/Android...
Hello,
I have a NRF52840 Dev Kit and a few Holyiot-17095 modules. From here - https://devzone.nordicsemi.com/f/nordic-q-a/25100/could-you-recommend-nrf51-nrf52-compatible...
Hello,
I'm using SDK 15.0 and I'm running the spis example on Keil. I can't get the log info to print on uart (I'm using PuTTY).
I tried enabling the log in sdk_config...
Hello!
I use nRF Connect v 1.8.6 on iOS and v.2.3.2 on Desktop.
I have 2 different boards successfuly working and based on nRF52832, SDK 15.0, s132.
Both has custom...
hi
I am trying to integrate the flash read/write functions in my BLE application with procimity .
i have received error on serial
<error> app: ERROR 3 [NRF_ERROR_INTERNAL...
Hello!
I use I2S on nrf52832 custom board with microphone.
1. When data_handler function take place, I see a new data (p_data_received). The first question is: I can copy...
Hi.
I am using nRF52832 and SDK15, S132 Softdevice.
I integrated the uart example in the ble_peripheral folder with the buttonless_dfu example, and added the passkey....
Hello
I have just started development for the nRF52480 preview development kit.
I am powering the dev kit through USB on J2 (with power switch set to VDD).
I want...
Hi Everyone
I have written a code using the peripheral template given in Nordic\nRF5_SDK_15.0.0_a53641a\examples\peripheral path which works very well so far.
My aim...
Hi all:
Q:When i reboot the board which burn the serial project , how to add the device key to serial board again?
I use PYACI to control the board which burn the serial...
Hi,
I have couple of question regarding ble_app_hrs_freertos example (sdk 14.2)
Possible bug - in main() , erase_bonds is a local variable (defined on the stack)....
Hi!
1. Is there any method to make paring and bonding without radio channel? For ex. write any data directly to .hex to periph and central devices.
2. Is it possible to...
