I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi,
can you help me out please:
I have followed devzone.nordicsemi.com/.../ and have configured as it shows.
But NRF_LOG_INFO does not work however SEGGER_RTT_printf...
Hello, we are using 3 nRF52840 DKs, NSDK 15.2, Mesh SDK 3.1.0, SoftDevice 6.1.0 and Segger Embbeded Studio as my IDE.
I have followed the documentation here to program some...
Hello Nordic team,
We are busing NRF52832 for our product.
Please let us know if it needs RTA (Radio Type Approval) and BT SIG certification.
Please provide us the link...
Exactly as the subject states, we are in the progress to start development on a portable device communicating over LTE-M (CAT-M1) and we are in need of voice communication...
Hi,
I have the following setup:
- IDE: SES
- SDK: nRF5_SDK_15.3.0_59ac345
- SD: s140_nrf52_6.1.1_softdevice.hex
Issue description:
I have modified "ble_app_uart_c...
Hi,
I am connecting (with nRFConnect) with one dongle to 2 devices in parallel and want to get 2 different logs, one to each, but I get all the data in one log.
I also...
I am trying to run the example for secure bootloader debug present in SDK 12.1.0 and SD S132 v3.0.0 on NRF52832 with ARM GCC
The aforementioned example "nRF5_SDK_12.1.0_0d23e2a...
Folks,
I have had a custom service with two characteristics up and running for a while.
I'm trying to add (well in fact HAVE added) two more characteristics to the service...
Hello Everyone!!!
I want to interface an external flash with nrf52832. I will be using it to store the new image downloaded during OTA-DFU. Also, some data will be residing...
Hello,
i want to debug the Thingy bridge and node project in Keil instead of in SES.
I have created an project in Keil and imported every .c file like in SES also define...
My bluetooth analyzer is showing that my peripheral's scan response packets have a T_IFS Violation 326.125 us too long. I don't use scan response data for anything but I want...
Hi,
In ESB protocol, the have a RSSI field in nrf_esb_payload_t structure., and I can use this field to get radio receive signal strength.
Does the larger the value, the...
We would like the ability to build our application using a version of the nRF Connect SDK that we have in a private repo. This is desirable for both long term maintenance...
Hey guys. We want to work on personal project for indoor navigation using mobile phone and ble bracelet. We want these two together. But if it is not possible at first using...
I got this nRF52832 Breakout Board from Sparkfun and the nRF52832 Hardware DK, I followed the instructions on the page of how to hookup the boards in order to flash the Breakout...
