I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I have a problem with the new SDK11 Bootloader. With SDK 0.9.2. everything worked fine, but with SDK11 not. The strangest thing is that if i use the precompiled hex file in...
Hello, Dear Nordic Development Team.
Recently I made the Android app using nRF nordic SDK to detect BLE beacons(iBeacon and Eddystone).
(no.nordicsemi.android.support...
I have to implement high throughput and I plan to use L2CAP. My transmission has to be reliable so I need flow control functionality. In API, I can only see functions for...
hello.
i have microsoft mouse using 24l01 ic its usb receiver is lost. i have them in bulk quantity is there any solution for usb receiving end?
thanks
Hi, being interested in proximity apps - I played for a while with the nRF51-DK kit when I came up with the nRFready proximity app page.
I looked at description and video...
Hi all,
I am new to nordic. I have two pca10031 dongle. First of all I had programmed example codes (one as peripheral and other one as central) and tested, it works fine...
Please suggests...
I want to send parameter like this ...
uint8_t val = 0x00,0xff;
NSData *data = [NSData dataWithBytes:&val length:1];
[proximityPeripheral writeValue...
Hi.
We need volume control for apple device. I've added parts of the HID kbd example to ANCS example. However I have problems adding the service to advertisement. I've...
Having too much fun with iOS Apps :-D
I am using heart rate example from SDK11.
Firmware example and HRM in nRF Toolbox worked well.
Then I moved
advdata.uuids_complete...
I am trying to use Enhanced Shockburst RF protocol for the new nRF52 chip. I did not found it in the current nRF52 SDK 0.9.2, and I took a brave move to use the files and...
Is it possible to modify beacon properties of iBeacon and Eddystone in one application?
I am creating a android application, I need to modify properties of beacons and...
Hi
I am going through the ble_app_multirole_lesc example and I can see the following line:-
/* Due to DRGN-7235, dhkey_reply() must come after auth_key_reply() */
...
Hi community,
I'm using the multi-link peripheral example from SDK v6.1.0 with s110 soft device version 7.3.0., this is cross-compiled with arm-none-eabi-gcc.
The both...
Hi all - Im porting projest from Keil4 to Keil5 and am now stuck on this error - division by zero in SDKs sources:
*** Using Compiler 'V5.06 (build 20)', folder: 'C:\Keil_v5...
Hi, I can't seem to find any hardware design guidelines for the nRF52832 chip, I can only find hardware information for the development board.
Best regard Thomas
