I'm writing a wav file from the nrf52840 board to the nor flash w25q128jv with a capacity of 16mb but it seems that I can only operate on the first 2mb, even when dividing...
Is there an AT command (For modem firmware >= 2.0.2) that can be used to validate whether the LTE modem can communicate with an external MIPI RFFE switch (for example on a...
Can Nordic share specific instructions on how to enable hardware tracing?
I've received the following patch from Tomasz, however I still see "trace clock missing" in Ozone...
Hi
our last product is based on nRF5340 and now we start a new design based on nRF54H20, and its essential for our design, i checked alot but there is no datasheet, reference...
just passed Cellular IoT Fundamentals while I was waiting for my nrf9151dk to be delivered... Now that I have the DK I can't get the dk to be provisioned...
I couldn't get...
NCS currently has a nice feature where the firmware versions are printed in the boot banner:
Is there a config option to also enable printing the nRF91 modem firmware...
Dear all,
after cutting the SB bridge to the QSPI chip and close the ones to get the pin free and disabled also qspi inside the nRF52840dk_nrf52840.overlay file I'm unable...
Hi...
I want to communicate the external sensor with nRF52 using I2C protocol , here i used twi sensor example and modified . constantly i am getting 0 value
Here i am...
I am new to the Nordic Enviornment am having problem getting my first application running.
I am using IAR 7.40 with the nRF mbed dev board that has a nRF51422 on it. I...
hello,
i am using nrf52832 and sdk 15.3, we are building our project in ble_mouse example, after our device is connected to PC it directly getting disconnected and showing...
Hello,
We have noticed that with an iPhone 11 with IOS 13.2. We have a lot of disconnection because our device simply didn't respond to a ping request.
Our device is an...
I am using the Adafruit nRF52 Feather development board and their implementation of the Nordic blob for Arduino. I am having the problem where the output data is as expected;...
Hi,
I have a nRF9160DK with a Sim Card from a local provider, that supports NB-IoT.
I modified the example program in \ncs\zephyr\samples\net\sockets\echo and wanted to...
SDK: 15.3.0
I has ported cli example to my application.
There is a problem with displaying the text. (using custom board + USB to TTL tool)
as you see, "\n" doesn...
I have read a number of posts here about creating new projects, most are a couple of years old. I just want to make sure I'm not missing anything.
I am able to compile and...
Hi everybody, I would like to adopt an nRF52840 DK example to the nRF52840 dongle. ( There is a ble_uart_app example for the PCA10056 DK but not for PCA10059 dongle. I followed...
We are considering the nRF52840 for product integration and testing out now. We are looking for an RTOS example running in Segger Embedded Workbench and having problems -...
Hello,
im trying to use secure bootloader from SDK v 12.3. I have custom board with nrf51822 and one oscillator. I changed flags to custom board. I was able to compile the...
I need to update firmware in an nRF52 via TWI. It seems like it would be fairly easy to modify the serial bootloader/DFU provided with the SDK, but I'm not finding the code...
Hi, I'm using SDK15.2.0 and A nRF52832 for my project.
I followed the "flash_fstorage" example give by Nordic, to write in the flash memory in my project.
When I run my...
Hello,
I am using System ON mode for low power. Still it is consuming 2mA. I heard i can go down to 60uA. I am using UART for Communication. In Sleep I tried to disable...
We wanted to use the NRF51-DK to flash a few nRF51822 based beacons, using the SWD interface. The docs recommended using the Segger J-Flash program, but that program is now...
