I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
we also produced self PWM for ADC wave form testing. when we stop transmission, we will get good waveform out, but when we starting transmission, output waveform shape is...
Hello,
I am looking in the SDK how to get the binding table on the local device. I don't find in the API which
function could give me this table to know the bindings done...
After more than a week of trying different options, settings and changes my AWS_IoT app for nRF9161 is not working. All I get on Serial monitor is this:
*** Booting My Application...
Hello,
i am fighting with getting an simple NUS running. I just followed on the provided example.
But got the error message via RTT: app: ERROR 4 [NRF_ERROR._NO_MEM] at...
I am using nrf54L15-PDK, the GPIO has output voltage at 1.8v, though the supply voltage is 5v. I want to configure OLED display with my board but the GPIO is giving me 1.8v...
I'm looking for an example where the firmware is updated using "DFU over UART from the bootloader" compatible with nrf5340
In my application there is no external SPI memory...
We are currently testing our product which has an nRF9151 SiP.
In order to provision a chip to nRF Cloud, the IMEI and HWID is required. We are already familiar on how to...
I am developing a product that uses Gazell and USB. During development, I am using the nRF52840 due to availability. For mass production, I will use the nRF52833 to reduce...
Hello Nordic Team,
I am working on a project that involves scanning QR codes on an Android device and transferring the scanned data to an nRF52840 DK using Bluetooth Low...
Hi Support Team,
I am encountering various problems with the Developer Academy example found here:
https://academy.nordicsemi.com/courses/bluetooth-low-energy-fundamentals...
Hello,
I am using NCS v2.8.0.
In this, when I configured the application to use OOB legacy pairing only mode, the build process failed.
Following is the configuration...
In our firmware we use BLE together with ESB using the MPSL timeslot API, with the implementation inspired by this example: https://github.com/too1/ncs-esb-ble-mpsl-demo However...
Hi,
I am trying the sample code in this regard. I have changed the I2C pins in the overllay file and bme register address to 0x77 as follows. It seems working but I have...
I am using nRF52840/nRF52833 (raytac module, original board). With the current nRF Connect SDK, is it possible to disable NFC and use ports (P0.09, P0.10) as GPIO?
I am...
Hello,
we are currently in the process of verifying the nRF LwM2M Client, specifically focusing on the Queue Mode functionality. During our testing, we encountered an issue...
