I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi,
I am using Thingy91 and I successfully connected it to the cloud, also able to pull all sensor readings with the curl command: curl https://api.nrfcloud.com/v1/messages...
Hello!
I am starting to profile our device using the PPK2 and I am seeing some strange measurements when the device goes into its low power mode.
I'm attaching an image...
hi, customer use nrf52840 made mesh node. use nrf connect SDK v1.6. they have two quetion.
1: How to set 125kb low speed and long rang in BT mesh network,
2: How to enable...
Hello! We are targeting an nrf52840. We were able to compile and successfully use the mqttsn_client_publisher from the latest nRF SDK v4.1.0 for Thread and Zigbee. We then...
The Bluetooth keyboard sample does not work in an ipad(IOS 14.3)
The development board I used was nrf52840dk_nrf52840 (PCA10056).
I built nRF Connect SDK v1.4.2 through...
Hi,
I am experimenting BLE nrf52832 to Ultra low power consumption during advertising , connection and transferring data and also main thing is in ultra low power Mode....
I've recently setup SEGGER embedded studio to program an NRF52832 board and have had issues running the BLE examples.
I've been mostly working with the ble_sdk_app_beacon_main...
Hi,
I'm using the provisioner mesh example for the nrf mesh sdk but when I'm trying to provision (an other board with light switch client example also from nrf mesh sdk...
Hi,
We are developing an audio tranmission code with the mSBC encoder and decoder by using nRF52840 and referring to the smart remote3 example code.
In that smart remote3...
Hi,
As I understand it, LLPM does not currently work on nRF5340 reliably at all (is that correct or does it work well if 1ms interval is increased to something larger?)...
I am using "nRF connect SDK" to implement BLE mesh on BL653 development board, Can you kindly suggest what changes/configurations in "nRF connect SDK" have to be made to run...
Internal fault[0xb3b91b:5060750] occured during linking when disable the log output by [#define NRF_LOG_ENABLED 1],
but no error occured when eanble the log output by [#define...
I know there are other (long!) threads about PDM mics and I've studied them all carefully. Unfortunately I'm still having an issue with our on-board mic. The difference is...
Hi,
Toolchain manager is failing to download SDKs.
I am using:
Windows 10 PC
3.7.0v nRF Connect Desktop application
0.9.3v Toolchain manager.
Downloading sometimes...
Where is the provisioning configuration data getting stored ?
1. EEPROM
2. Any other non volatile memory
Is it getting stored in external chip to nrf52833 or inside...
