Hi,
I've been using the nRF51 dev kit, and today it stopped mounting when I plug it in. It doesn't show up as MBED or BOOTLOADER.
I use both Mac OS X and Windows, though...
SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Hello,
We want to set Tx power of +3dbm i followed the procedure as mentioned in following ticket:
I set the high voltage in network core main as following:
we...
Hi,
I'm able to select the nRF21540_nRF52840DK board for my project and I'm wondering how command the nRF21540 using the I/O pins and the SPI port. Do you have any examples...
I have to make a connection from a central_uart to 4 periperal_uart every 60ms Sending 30 byte .
I Have to make a polling of all the peripheral every 60ms.
I know that...
Device: nRF52811
Board: custom (EYSNSNZWW module is used)
SDK: 16.0.0
SoftDevice: S112(v7.0.1)
Sample Project: ble_app_uart
Hello,
Is it possible to read BD...
I have a custom board based on nRF52840 with some custom peripherals : LEDs, buzzer, buttons, etc
To get my app working I copied the nrf52840dk_nrf52840 board from the 1...
Hi,
I started using the Nrf5340-DK with the openthread cli sample. It works fine, and now I'd like to move the main UART to pins P0.24 and P0.26.
To do so, I created...
Hello, I've been trying to migrate my code which uses NRFX SPI functions to NCS 2.0
The code compiles just fine on NCS 1.9, but after migrating to NCS 2.0 I noticed that...
I have just been hired to this company and they have assigned me to repair some of their defective modules. The modules are BL651 with what I believe to be nrf52810 processor...
Hi,
is there a driver available for the VM3011 microphone that comes with the Thingy:53?
The chip has some power-saving and wakeup features that are configured using I2C...
Hi,
We are having some issues communicating with a Winbond W25Q64 flash memory. Using the standard SPI Zephyr drivers an attempt to get the Manufacturer ID returns 0xDC...
Hey!
I am working on a zigbee asset tracking system for my thesis. Got myself 3 nrf5340 boards and a sniffer.
Unfortunately i can't manage to get started with zigbee...
Hi everyone!
I have recently been trying to flash the 'blinky' zephyr sample to the nRF5340 Application Core on the R4D4 Control Board. I am yet to have any success, by...
Hi there
I'm using Asset tracker v2 as a base for my application with AWS, however I wanted the FOTA to download to external flash, as the Asset tracker application is large...
I'm using a nRF5340DK with nRF Connect SDK v1.9.0 with MCUBoot and want to upload firmware updates for the application core using mcumgr.
I use the hello_world sample in...
We are migrating from Modem firmware version 1.2.x to 1.3.x. Since it is now possible to enable LTE and NBIOT both using the following XSYSTEMMODE configuraton:
How does...
