Or is there any LCD you could suggest that doesn't need that much code? Simple numeric 2rows would be enough. Want to use it with the nRF51-DK to display some measured valued...
I would like to develop my own central device to communicate with the RedBear Arduino shield. The RB device uses a from of UART communications to send data to/from Android...
I was wanting to use a nRF24L01 with a breadboard but its pin-out didn't allow it. A solution then occurred to me based on parts at hand. I wrote it up with instructions and...
Hello. Can I get a literature to the nRF51 series?
I need a full abstraction of the nRF51, like a book or other information, it's structure schematic of build-in modules...
hts, HTC phone, nrf tools HTM, nrf51822,
every time when it's power up :
the once connect: error code 0x7A cann't read characteristic and 0x14 state change.
the second...
Our company needs wireless temperature sensors (can be externally powered or battery operated) and transceiver with 4 channel analog outputs. It has to be finished product...
I am toggling Value of slave through a button on nrf51822ek .This Value is displayed on MCP of dongle, but i have to get this value on terminal to send it to pi then through...
Hello,
I have developed a Zephyr BLE project with the MAX30102 sensor. I tested the code successfully with the nRF52833 DK, and it works fine. Now, I am trying to flash...
Hi,
Our system includes an nRF52840 (ncs2.4.0, zephyr) as a Host and a NAND (Macronix MX35LF2G24AD) as a flash; communicated with each other via SPI.
At Host, we can do...
Hi,
My customer tried using the keyboard we made based on nRF Desktop with NCS version 2.1.0 with an iPad and noticed that most of the keys work, but space bar does not...
64 bit unique device identifier. DEVICEID[0] contains the least significant bits of the device identifier. DEVICEID[1] contains the most significant bits of the device identifier...
Hi there,
I have successfully enabled CDC ACM Serial Recovery mode on the nRF5340, which allows me to update the application and network core with two separate .bin files...
I'm trying to create a board configuration for MicroPython under the Zephyr port for the nRF9161 and add functionality to use the DECT modem. I'm following the example code...
Hi
I have used the nsc-sbom utillity to generate an SBOM for my project.
However, instead of the HTML output format I need to generate it in a FDA recognized format...
Hello,
I'm currently working with the nRF9160 to utilize Cellular Monitor to connect the board to a cell tower. It is capable of connecting and filling out the chart in...
I have bought a brand new nRF52840 Dongle that I want to flash. I have installed nRF Connect for Desktop from https://www.nordicsemi.com/Products/Development-tools/nRF-Connect...
We want to use the nRF7002 in our product and supply it with energy using a LiMnO2 cell in CR2 format. The LiMnO2 cell has a nominal voltage of 3.0V and a maximum voltage...
GPIOTE has higher current consumption than port events. We are trying yo use PORT events to detect GPIO inputs with buttons. But we are not successful, is there any example...
When I follow lesson to do exercise that lesson 2 exercise1 step 7.4.2,I press button 1,I can see the led1 turn to light but no log message in the debug console.
The debug...
We are preparing for all of our radio compliance testing. Our board is inspired from the nrf9160dk design using the nrf9160 chip as the main controller and an nrf52840 flashed...
Hello!
I am having issues configuring a signed application, is there any way to build a signed application for the mcuboot bootloader without building the mcuboot alongside...
Hi, I'm trying to use the VL53L0X sensor driver with zephyr and nRF52833, but I'm getting errors when the driver is trying to calibrate.
Below are the errors returned by...
