We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Is there a possibility to reboot the JLink OB chip on nRF52 DK from nrfjprog?
If not, could you add this feature in future versions?
When using the Virtual COM Port feature...
I am able to subscribe for differen t notify and indicate function .But i didnt get the data in notify and indicate function. i am add the code and log files
we are trying to use SD card on nRF52840 but we are facing with some issue regarding io voltage.
nRF52840 VDD voltage already are connected with 1.8V and then we can not...
Hello,
While looking around for documentation and some references for Enhanced Shock Burst protocol, I came across one sample in NordicPlayground: https://github.com/NordicPlayground...
Hi,
I've used 'nRF Connect for Desktop' to install the NCS v2.1.0 and v2.1.1,and rename the ncs folder like this:
when i try to 'Add an existing application...' it will...
i burnt the fb63 and now NRF52840 is not able to power up. even desoldered the FB63 and put a short on the particular pads. THe eval board is still not able t power up. Is...
hello Nordic
i want to use nrf21540 dk to run a simple Bluetooth / beacon example with the ncs (v 1.9.2) i do not see some rise in dbm power with the nrf connect android...
Hi.
In my current project with nRF52832, I have used the following port pins to connect it to an accelerometer and a SPI flash memory:
I would like to ask, get opinions...
I want to setup pairs of nRF51-dongle and nRF51-beacon where dongle-1 will always bond with beacon-1, dongle-2 with beacon-2, etc. If dongle-1 and beacon-2 are switched on...
Hello,
I am using the ADC input on the nRF52 DK and its working correctly. Its setup right now to use its Internal Voltage as Reference. I wanted to know if there is anyway...
in nrf52832 ，We know that there is a process of RF signal ramp up between tx en and tx ready signals. Will RF signals be transmitted during tx ramp up preparation time? If...
Hello there,
I tried combining the GNSS simple sample code to my edited version of the MQTT simple sample code and I am unable to build anything. I am getting this error...
Hi
I am currently trying to create ADC and BLE Services using nrf5340 DK for evaluation before jump to custom board. So based on several threads in this forum, I found this...
