We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I am developing my application on top of low power node example available nrf sdk for mesh v5.0.0. The idea behind the application is that after the node is provisioned...
Hello there!
The nrf52832 qfaa reference circuit uses a coplanar waveguide for the antenna section, leaving a keep out area on the inner layers beneath the matching network...
Hi,
I wont to disable serial to lower the power consumption on my Icarus board. I am using the AWS IoT example which uses the AT HOST Lib. If I try to disable serial using...
Hi there,
I was using a PCA10040 DK (V0.9.0, 2015.49) to try out nRF Connect SDK samples (peripheral_lbs) and suddenly found I couldn't program, erase or recover the device...
My custom connection-less BLE sensor beacons (nRF52833) will advertise a simple event e.g., opening a door on trigger-only. Up to ten or more such beacons may be sensing at...
Hi,
I was working with ncs2.0.0 and using the CONFIG_AT_HOST_UART_1 =y config command in the .prj file to change at_host uart config from uart0 to uart1 and I was able to...
Hello,
I'm trying to send message to ZC from my ED using Messaging Cluster.
I've added Messaging cluster with no attributes and I can see it on the ZC side.
Next I'm...
Hello, first of all, I am an engineering student. I want to learn communication and I just started it. I don't understand exactly what the following lines do. How can I do...
Hello
In SDK v 2.2.0 all functions cfg_cli.h have a __deprecated keyword which causes a compiler warning
Can you point to the documentation that describes the functions...
Hi,
I am using nrf52833 for AOA, the examples are direction_finding_connectionless_tx and direction_finding_connectionless_rx. Now I use two antenna array for locater and...
I cannot get MCUBoot to create a image on external spi flash. Using the spi_flash sample I can read/write/erase fine with spi flash configuration in my device tree.
I...
In
https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.2.0/nrf/ug_thread_tools.html#installing-otbr-manually-raspberry-pi
bulding the "compatible" version 0895ad5 with...
Dear Nordic team,
I have successfully run gnss sample and mqtt_simple sample separately. The next step I am going to do is to send location data from nRF9160 to the mqtt...
