We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi all,
I'm sure I must be overlooking something very basic here, but I'm struggling to find a way to view output from printk statements in a sample project I've built and...
Hello team,
I found a great conversation on securing my device at https://devzone.nordicsemi.com/f/nordic-q-a/23972/cybersecurity-features-for-nrf52-chips but I wanted to...
We are using the nRF9160 with modem version 1.3.2 and SLM version 2.0.0. We have our unit in eDRX mode, using flow control on UART0, and only get WakeUp interrupts when we...
Hi, I am using nrf52840 with sdk17 and soft device 140 on custom hardware. My application works ok but I want to enable extended advertising using ble_advertising library...
We have a peripheral based on s132 soft device. Older MacBook Pro (BLE 4.2 or 4.0) sees the advertisement and tries to connect, but fails. This was not in our original target...
I have an nRF52840 design that uses I2C to communicate with a SGTL5000 CODEC as well as a U-blox SAM8 module. Once MCLK on the I2S is turned on and running, if I try and talk...
Hi,
I was looking at the factory configuration data for Matter, and it states that it allows the user to pass arbitrary data in the form the " user " field in the JSON ...
Has anyone dealt with interfacing a GPS module on SPI with a nf52832. What could be the best options as it goes for GPS modules, and do you have any simple code to get started...
Followed instructions on https://infocenter.nordicsemi.com/index.jsp?topic=%2Fug_sniffer_ble%2FUG%2Fsniffer_ble%2Fmin_requirements.html
Running on Linux:
LSB Version:...
Dear All, I am creating a device driver (for ncs v2.2.0) for a battery charger. One of the properties for the battery charger is the bit-value of the battery FET. (so it is...
Hello,
I have one use case. I am using NRF52840 in my project. I have one central device and there will be many peripheral devices.I want to the central device to get connected...
Hi, The antenna we use with the nRF52832 for BLE comm. is also exposed to high radiation at the 6.78MHz band simultaneously.
We can use countermeasures in order to block...
Hi there,
I have compiled and programmed the latest Serial LTE Modem app (v2.2.99) on a Thingy:91
When I execute the "AT#XNRFCLOUD?" command I get the following response...
Hi
Right now I'm using NCS2.0.0 & nRF52832 for development the mesh application.
Whenever My setting the "Light CTL Default Set"(in the file light_ctl_srv.c for function...
Hi Nordic,
We are developing an application for the NRF52832 and neither chip selection nor pcb can be changed at this stage (no external flash can be added). We need to...
