Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi -- I am having an issue with partition manager when I have mcuboot enabled and an external flash partition selected in devicetree. I've attached a very minimal project...
Hello,
I am writing about an issue that come up with enabling MCUboot.
The device is a temperature/humidity data logger recording data into Storage Partition with NVS...
Hi Madam/ Sir,
I am using your PPK II to measure current consumption. Based on your document, this device use an internal resistor to measuring current. And the PPK features...
Hi, here I have a custom made board that has a MDBT42Q module (nRF52832 based) and has connected a RFM95W LoRA module, using this simple send lora code:
# include < zephyr...
Building the app with the factory data provider (CONFIG_CHIP_FACTORY_DATA), active logging for Matter (CONFIG_MATTER_LOG_LEVEL_DBG) and immediate logging (CONFIG_LOG_MODE_IMMEDIATE...
Hi,
I'm migrating a vscode project from 1.9.1 to 2.1.2.
I'm testing on nrf52840dk_nrf52840.
I'm using I2S.
In the 1.9.1 environment I have an overlay.
&i2s0: &i2s0...
Goodmorning,
I'm using nRF5_SDK_for_Thread_and_Zigbee_v4.2.0_af27f76
in file /external/zboss/src/zcl/zcl_thermostat_commands.c
at line 246 there is this code:
...
Hello ,
I am developing asset tracking solution using BLE Beacon (using nRF52832. Not using AoA and AoD feature) and BLE Gateways (using nRF52833). I just want to detect...
Hi, I'm trying to flash the nrf9160 through Visual Studio Code and I'm getting an error. I'll describe the error and what I tried to fix it below.
1 - First I tried to flash...
Hello Nordic Team,
I am currently using GNSS Sample to get the location data for the nRF9160. However, I am not getting the data as I keep getting this output.
May I...
Hello,
We have an application built with MCUBoot running on a nRF5340. We have used NCS v1.7.0 and NCS v1.9.1 versions for our devices.
All MCUBoot, app core image and...
Hi Nordic Team,
We want to verify controller functions on our own chip with core5.2, so I want to connect it with nRF5340 board by HCI uart, so that I can verify CIS or...
Hi,
followed below link to do the firmware updating using DFU service with "nRF Connec"t application on Android mobile.
https://novelbits.io/nrf52-ota-dfu-ble-part-4/...
I observed that the GPS antenna of my Thingy:91, version 1.6.0 - that has the TRIO mXTEND chip antenna component NN03-310 - is much less efficient that the GPS antenna of...
Hi we designed a custom board that contains the wifi module: EWB-STERLING,( 453-00014R ) In my board, I routing the USART1 pins to FTDI chip (FT4232 with 4 Channels). I search...
