Running a test that sends a small ping packet to a server about 1/minute and I'm seeing intermittent board resets. I'm still trying to track down the cause, but in one case...
Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hello,
I have created a standalone application using the NCS nrf SDK and Zephyr. I do manage all my project dependencies using West. I have some questions related to the...
I referred to the following sample.
\ncs\v1.4.2\zephyr\samples\subsys\nvs\src\main.c
void main(void) { int rc = 0, cnt = 0, cnt_his = 0; char buf[16]; uint8_t key[8],...
good day, we plan to create a device which will send button status and the ble_blinky example seems to match our requirement. is it possible to add pairing/repairing option...
Hi
I have managed to get a SNTP client working. I want to update the date-time clock with the SNTP timestamp. From the SNTP client I get a sntp_time object:
While the...
Hi,
We are looking to purchase the nRF52833 DK. The data sheet says it supports an RX sensitivity of -95dBm. Does it not support up to -103dBm as quoted on the data sheet...
Hey,
I would like to know if its somehow possible to rebond if the central device (nrf52) has deleted the bonding information about a device and then this deleted peripheral...
I'm trying to implement a timer with 1ms resolution that my application can use externally using a callback function.
The idea is to
Implement the timer as a 32-bit...
Hi all,
I need to upgrade an nRF52 device with SoftDevice 5.0.0 and bootloader.
I have to upgrade from SD 5.0.0 to 7.2.0.
I use this command to generate the zip file...
Dear all,
I have some problem with SPIs co-work.
I enabled two SPI instances in this project.
SPI Instance 1 function(non blocking mode - DMA enabled, 4Mbps): reading...
Hi there, Thanks in advance for your time and attention. We started to see some cases where our devices boots and gets a NO_PAGES error after having been turned off(or at...
I try to simulate system hang by adding while(1) after calling watch dog feeding function. But watchdog event handler _wdtEventHandler() isn't called.
int main(void) { ...
Hi,
I am currently trying to read the GPIO latch register in my Zephyr NRF SDK 1.9.1 C++ project with the following line:
This is resulting in the following compile...
I have downloaded the nRF connect for PC and successfully managed wo work with the dongle using the BLE General tool but when I tried to use the power profiler tool probably...
Hello Nordic Team,
I have a nRF52833 DK and I am running Light switch Server and client applicaiton in it.
I am in the moment customizing the application for our custom...