Running a test that sends a small ping packet to a server about 1/minute and I'm seeing intermittent board resets. I'm still trying to track down the cause, but in one case...
Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi, We are developing with the nrf9160dk as our development board. We are working from the aws-nrf-cloud a-gps sample (cat tracker sample) for our stack as our main system...
I'm trying to work out why this happens, but am not a great expert at linker scripts. Currently, we use arm-none-eabi to build our projects (and cmake) to great effect. I...
Hello,
we are using the following equipment:
- nrf5340-DK Board
-Zephyr SDK 1.9.0
Our application is intended to transfer a large number of data over BLE.
So, we...
I would like to test nRF52832 passkey method with pc-ble-driver-py ( https://github.com/NordicSemiconductor/pc-ble-driver-py) . Does pc-ble-driver-py supports passkey? Where...
Hi, I am developing an application that includes the following features: 1. PWM to control the buzzer 2. 2 Uarte to communicate with 2 external devices 3. BLE to wireless...
I am trying to speed up the burning process.
I am using JLink ULTRA+ (swd max speed 50Mhz) and Jlink base( swd max speed 30Mhz) and NRF52833 but still get almost the same...
Hello,
We developed a system that consists of 1 central and 10 peripherals, all are based on nRF52840. Below is the configuration of the system:
Central: AWSFreeRTOS...
So I've been reading and re-reading all the guides and white papers for the last week, and I think I almost have my head wrapped around everything, but am struggling with...
I have a code build on top of nrfx 2.0 and after a few received bytes I get NRFX_ERROR_INTERNAL back from nrfx_uarte_rx call in blocking mode.
So I can process around 20...
Hello, I want to get information list about BLE GATT services and characteristics of a device.
I want to connect to a peripheral with a specific name, then get all metadata...
Hello,
I'm evaluating NRF Connect for potential use in a project and so far I've been quite unsuccessful. I'm using NRF Connect for Desktop v3.11.1 and my toolchain manager...
Hi,
I am trying to send GPS coordinates over HTTP, but get some problems when is comes to the use of lte_lc functions: lte_lc_init(), lte_lc_psm_reg(true), lte_lc_connect...
I am using the DK PCA10041 with SDK 17 and mesh SDK 5.0.0. I have run into an odd issue. I set up the dimming mesh example with a client and two servers and provisioned them...