Our prototype is back. At first, I used NRF Connect to flash it, but the official PC software couldn't flash the firmware. I followed the wiring instructions: (1) connect...
We are developing an application based on the nRF9151 using NCS 3.1.1 and modem firmware mfw_nrf91x1_2.0.3 .
We would like to use Proprietary PSM to control the modem's...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
I transfer data by ESB between send and receive. And I want to transfer 2 bytes x 10 data that is received by ESB every T[s] to ESB receive (trigger) -> PPI->SPIM, 2 bytes...
I am trying to conduct a basic topology featuring two NRF52840 boards using the Thread Topology Monitor and a thread application using CLI. Once built and connected with J...
With the Bluetooth Low Energy v3.0.1 app within nRF Connect for Desktop, if I use either the nRF52833 or nRF52840 Dev Kit boards as the scanning device it is able to connect...
Hi,
We are using bl-653,
we wanted to enable UART-1, for bl-653 we wrote overlay & configurations mentioned below:
&uart1 { compatible = "nordic,nrf-uarte"; current...
Hi,
we are observing an interesting range of problems on nRF52840 devices we are assembling, where some percentage of them fail with the following error. While ti may be...
Hello, guys.
We are using nRF51822 SoC together with nRF5 v12.3.0 SDK.
According to the nRF51822 memory layout , half of the 256KB flash memory space is taken by the Softdevice...
Hi, I am developing a zigbee device on Nrf connect sdk 1.9.1 which has 9 endpoints, i am not able to create more than 8 endpoints perfectly.
i tried to change ZB_MAX_EP_NUMBER...
hai,
i am using nrf5340dk NCS (pca10095) v1.9.1 ( using visual studio code IDE )
i want to use nrf5340dk GPIO pins for NETWORK CORE use.
referred Nordic and zephyr website...
I added a new event module to asset_tracker application. The default LOG_DBG messages are very well shown in LTE, but that of my module don't appear in LTE. I replaced LOg_DBG...
I need help extending the LWM2M sample to use PSM to optimize the power consumption of LWM2M.
Scenario:
1. Enable PSM on the LWM2M sample.
2. Set the Lifetime of the...
Hi,
I got a product with nrf52832
i use one uart and i need to add another rs232 uart to it.
Since the NRF52832 has one only 1 harware uart i thought about implementing...
I'm developing a BLE device wich includes the USB Mass Storage feature with microSD card throught SPI.
My developmetn environment: - nRF52833 DK - nRF Connect SDK v1.9.1...
I'm working on the sample ncs\v1.9.1\zephyr\samples\subsys\usb\mass to create a device featured by USB Mass Storage with FLASH memory.
Since I found only old threads about...
We observe something that I can’t explain at the moment. Could you help to find the root of the issue, please? See below.
1. When the battery is connected first, and the...
The Mesh SDK timer_now() function is discontinuous once the overflow counter reaches 256 (and all subsequent times where m_ovfw_counter % 256 == 0). Since the local variable...