Hi team,
I recently purchased some nRF54LM20A units and I am currently working on interfacing them with a W5500 Ethernet module over SPI. However, I am facing difficulties...
I just programmed 2 Boards.
One Peripheral advertising with 1m Phy and other peripheral with s8 codded phy.
Using NRF connect app and wire sharc I made sure that I really...
I’m using NRF Connect SDK 3.2.4 with the nRF54L15-DK. I’ve successfully used the nrfx_gppi_conn_alloc() and nrfx_gppi_conn_enable() APIs to connect a timer to a GPIOTE output...
Hi, I am starting to get into the Nordic world and want to design my first pcb with nordic chips. I would like to get a review on my schematics and the pcb. I am mostly interested...
Hi!
I am evaluating some nrf9151 boards using the DECT NR+ stack. I have made my own PING test using UDP to test latency and loss.
Setup: nRF Connect SDK v3.3.1, DECT...
I had TWO DKs as described in the title randomly fail on me in the same way, months apart. Additionally, I had an earlier rev DK, 2.1.0 (NRF5340 is NOT the IMCU on this version...
I'm trying to get a temperature reading from the on-chip temperature sensor on the NRF52832 - I know it is not a very accurate sensor but I still want to use it. I found a...
With IAR (EWARM) 8.50.9 the UART project in the SDK compiles fine.
After upgrading to IAR (EWARM) 9.10.1 or 9.10.2 I get compiler error:
Error[Go029]: Variable "sec_mode...
Hi!
I'm trying to use a precompiled library of TVOC sensor ZMOD4410 in a project based on the azure_iot_hub from Nordic, running it over a nrf9160 board.
This library...
When I follow this tutorial and build the secure BLE bootloader example, I got this error:
cannot find ../../../../../external/nrf_oberon/lib/cortex-m4/soft-float/liboberon_3...
Hello,
I've been working on a big software project on the nrf52 DK with Segger Embedded Studio and added a lot of libraries and drivers. The issue I ran into is that if...
I am attempting to update firmware on hardware already in the field. The firmware in the field is based of sdk v11 and has the legacy bootloader for OTA DFU. After some digging...
Hello Nordic,
Due to recent shortages we have switched from a BLE module with external LF oscillator (uBlox Nina-B3) to a module without external LF (Laird BL654). We have...
Hello,
I'm currently starting to develop with the Nordic nRF5340dk and trying to build a mesh network but i'm having some trouble on the examples to understand and buld...
Hello guys,
I have some doubts in the examples you provided for BLE for mesh.
My questions are:
1. - In the examples of light_switch (server or client mode), the nodes...
My goal was to make a bootloader, that, when not requested, still goes do DFU mode for 5 seconds,
so that there is always an option to get to the bootloader after boot,...
I would like to do log timestamping using the UART backend with NRF_LOG.
As described in many devzone posts (e.g. here: https://devzone.nordicsemi.com/f/nordic-q-a/18707...
Hello!
I have a short question, maybe someone can help me.
I set custom advertising data in the following field on the advertising side:
Now I want to read this data...
Hi all,
I am developing a BLE device prototype. There will be multiple such devices. How can I write the UUIDs to flash while flashing the hex file. Or how can I get the...
When I call this function on any of the Development Kits, my application restarts just like when I power up the DK for the first time (after being programmed of course) or...
