I am using the nRF5340 development board to program the LBS example from the NCS SDK2.7. After system-off, the current is still several tens of microamps, which differs from...
When trying to add the device to the Nordic Cloud Device Management interface, I get the following error.
"There was an error adding your device: No device found for this...
Hi,
I am using the heart rate sample.
I have connected ground to ground, 3.3v to vdd, SDA to pin 26 and SCL to pin 27. I have 4.7k pullup resistors on SDA and SCL. When...
Hi,
I am developing a custom PCB based on the nRF52840 and am currently trying to flash/debug it using an nRF52840-DK (PCA10056) as an external debugger.
connected devices...
So I have two questions. My first is on the impedance matching network on different pcb stackups. So wouldn't I need a different matching network for a different pcb stackup...
We use the NRF Mesh Android Library (and are developing with iOS version as well). An issue that we are running into on a small number of devices is that the library things...
Hello together,
i am trying to connect to an Azure Blob Storage Container via https with a nrf9160 but I am only getting error 111 (connection refused). For that I am...
Hi,
we have implemented https://github.com/nRFCloud/MQTT-bridge-mosquitto in our AWS account. but in we are getting error like
January 07, 2025 at 14:51 (UTC+5...
Is it possible to emulate COM 4 ports over nRF USB using CDC ACM device class? I was able to get 3 working but when I added 4th one it didn't worked out. Is there any
limitation...
We need to measure short distances with precision, aiming to detect whether a door should open or not using a kind of smart key.
Our mission is to implement a solution using...
Hi
I'd like to use a gpiote in event to trigger a capture task of a timer (rtc timer). Now I realized that according to errata 153 in event may not always work. The suggested...
Hello,
I am evaluating the DECT NR+ PHY capabilities on the nrf9151 development kit, and I would like to understand how multiple access is implemented on the 9151 modem...
Hello Everyone,
I am new to nordic devices, but i have been for the past 2 weeks trying to build something. First I have created a new board "Holyiot_21069" with Visual...
I need to understand the basics of creating a ZigBee application from the examples provided for both the Thingy91 (nrf52840) and the Thingy91x (nrf5340). As I understand it...
Hello, I am trying to use the distance measurement library (in NCS 2.8.0 using nrf52833), but instead of using "scanned" events for synchronization I would like to trigger...
Hello folks,
aim of my task is to transfer ADC data through USB from my nrf5340DK to my windows PC, so I can use this data to controll some python game.
SDK: nrf2.6.2...
In a previous version of my project, that did NOT utilize TrustedZone, I was using a persistent storage library (NVS) and noticed that adding/using it would increase the current...
Hello,
I am developing an NFC application using the nRF Connect SDK v2.6.0 and the nRF Toolchain v2.7.0. During development, I tested my application on the nRF52840 DevKit...
I have MCU boot running successfully in my project using NCS 2.8.0 and sysbuild. I'm now trying to add hardware downgrade protection as described here:
https://docs.nordicsemi...
Continue.
PCA100059,S140,custermize periphral Blinky.
I have changed the value transfered between peripheral & center with
uint8_t* data;
uint16_t dataLen;
The max...
