Currently, we are using nRF5340 and nRF Connect SDK v2.4.1 for our development. We have implemented the DFU-OTA over SMP-BLE and it is working fine.
We are using the Single...
Hi,
I want to implement an audio feature via the nRF52, using PWM, I want to play a audio sequence, changing the PWM definitions in a fast rate, and thus would like to use...
Hello,
I am running the nrf5340_audio application on NCS v2.6.0 in broadcast mode (CONFIG_TRANSPORT_BIS=y) using 2 nRF5340 Audio DK's.
On my gateway, I have encryption...
I am trying to implement LittleFS on 1Gb QSPI NOR flash (W25Q01JV) on the nRF5340.
I am running nRF Connect SDK version 2.4.2 and am using a slightly modified version of...
Hello,
I am using the nRF52840 as modbus client and experiencing some missing bytes during communication (RTU mode) when using a high baud rate (460800). This tends to happen...
Hi guys, my setup:
- nRf Connect 2.6.0
- VS Code 1.88.1
- Apple Macbook M3 Max (ARM64 CPU)
- nRF52840-DK
I created a new project based on the zephyr button sample...
Hello,
We have nRF52833 on the custom board, now we want to do DFU over Bluetooth. During my initial research reults with following questions:
If you use 1. " nRF Connect...
I am having a recurring problem with NFC-CONNECT: build action. It hangs when building. Gets stuck with the following message in lower-right hand corner of screen:
The...
I am testing peripheral UART sample code with nrf5340DK along with some other device. I have connected the UART pins of that device with nrf to receive its data.
I am continuously...
Hi there,
I use the ADC in my firmware, which works well, but I also want to use it from the shell.
I enabled the CONFIG_ADC_SHELL Kconfig option, which made the "adc...
Hi,
I have been using the nRF9160-DK sample code to connect my dk to my hosted Azure IoT Hub. I have followed the documentation for creating the certificates for both the...
Hi Nordic
Sample: asset_tracker_v2 (with only changes to overlay-azure.conf) SDK: 2.5.2 Modem FW: nrf9160_1.3.5
I have followed this tutorial https://learn.microsoft.com...
Hi,
We have a custom board that includes an ST LIS2DE12 sensor. I followed what looks like the normal procedure to create an out-of-tree driver for it by refactoring the...
We recently got the NRF9151-DK and were trting to measure the e-DRX current on the system working on CAT-M1 network. The NRF9151 DK is loaded with Serial LTE Modem application...
Dear support team, The j-link firmware of my nRF52840-DK v3.0.1 is no longer available. Please provide the firmware of nRF5340 so that I can repair the DK.
BR,
zero
We have a project based on nrf5340 audio demo,Now we upgrade SDK from NCS2.4 to NCS2.6.
But when I built the DFU, I found that FLASH was not enough
I know this problem...
Hi there,
I want to measure VBUS without any external circuitry and came across the USB-C VBUS Zephyr API .
Is this API suitable for what I'm after? If so, do I need to...
I have purchased two nRF5340 development kits and I am trying to run the peripheral_uart sample using VS Code. I am unable to flash the code to the board. I have tried using...
I wanted to get external qspi flash working for the current project I am working on. We are developing on the nRF5340DK currently while waiting for custom boards. So my current...
I'm developing my application using the NRF Connect SDK in VS code. SDK Version 2.4.2. The NRF52832f we're using is integrated into a module made by fanstel and it has been...