Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
How to developp structure in Watch View 0

Hello, I'm following online courses in Nordic Academy (nRF Connect SDK Intermediate). As indicated in the first lesson,first excercice, I added device_message_queue...
13 views

0 replies

Started 1 hour ago
by unknown01234567
Not Answered
WIFI SoftAP + Station mode in one compiled image 0

nRF54LM20 + nRF7002, NCS 3.4.1: SoftAP provisioning and station low power in one image Our battery-powered product (no BLE antenna), removed due to space in the PCB and...
57 views

0 replies

Started 1 day ago
by SubuMuthu
Not Answered
Energy consumption in NTN mode vs LTE-M 0

Hi Have you done any benchmarking to estimate the difference in power consumption when comparing the nRF9151 in NTN mode vs LTE-M? In particular I am curious if NTN has...
44 views

0 replies

Started 1 day ago
by ovrebekk
Not Answered
Can’t generate ncs-sbom with nRF Connect SDK v3.1.1 0

Hello. When I ran the NCS SBOM command using VS Code, the following error occurred, and the file could not be generated. I would appreciate it if you could tell me how...
53 views

0 replies

Started 1 day ago
by Fumiya
Not Answered
Title: nRF54LM20 DK debug-out (P13) reset line holds an external nRF52840 target in reset after a pin reset or CTRL-AP hard reset 0

Setup - Programmer: nRF54LM20 DK (PCA10184), debug out header P13 to an external board over a 10-pin ribbon under 10 cm, SWD0_SELECT grounded on the target side. The DK...
61 views

0 replies

Started 2 days ago
by dm1

Recent in the DevZone Blog

Nordic nRF51822 ARM Cortex-M0 Development using emIDE

Hugh

Nordic nRF51822 ARM Cortex-M0 Development using emIDE To avoid the hefty charges with commercial compilers I tried emIDE with some success; here are the settings I used for the EV Kit Official emIDE…
- 22 Oct 2014
Beacon Kit - Mistake in Ref_Design_UG_v1.0

Salman

I connected the programming header as described in "nRF6930_Beacon_Ref_Design_UG_v1.0.pdf" 5.5.4 Programming interface. I was trying to program Beacon Kit but failed many times then I compared it with…
- 10 Oct 2014
SD card interfacing

Salman

Hi, I have written SD & SDHC card routine for reading, writing and erasing data from SD card. It used the hardware SPI of nRF51822. NOTE: 1)Define the PINs of SD card first before initialing. 2)Define…
- 10 Oct 2014
How different BLE packet types influence throughput

Stefan Birnir Sverrisson

There are several types of write operations, write request with authorization, write request without authorization and write command. You can see message sequence charts for those messages here and he…
- 9 Oct 2014
Measuring Lithium battery voltage with nRF51

Stefan Birnir Sverrisson

Here is an example of a hardware setup to measure the voltage on a Lithium battery with a voltage divider and a connected capacitor. The Lithium battery typically has a voltage range of 2.7 - 4.2 V and…
- 2 Oct 2014
Sniffer application for OS X

RK

I've put up on Sourceforge, a Mac OSX application which interfaces with the Nordic BTLE sniffer software and has some of the functionality of the Windows application Nordic ships with that software package…
- 1 Oct 2014