Hi,
I am currently testing the dect_shell example on two nRF9151 DKs and achieved a range of ~500m. I want to transition this setup into a multi-hop mesh network topology...
Hi: The device shows successful reconnection, but the mobile end is not connected.
And the connection information displayed on the device is (public), which is actually...
I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
Hi!
I use SD 6.0.0 and SDK 15.0.
I am developing an application and I want it to include service of buttonless OTA firmware updating. So far I have managed to zip my application...
i init the saadc and uinit saadc ,then init saadc again. my code is below:
err_code = nrf_drv_saadc_init(NULL, saadc_callback); err_code = nrf_drv_saadc_channel_init(0,...
Dear Sir,
I have connected a phone to a peripheral device using NRFconnect App.
Now I want to know the rssi value of the phone on the peripheral side.
I want to get...
I have an application with a custom service, based on the ble_app_template example. I want to add DFU functionality. I flashed the DFU secure bootloader and can discover the...
If I use NRF_SDH_DISPATCH_MODEL with NRF_SDH_DISPATCH_MODEL_APPSH what size do I need to use for the scheduler data size and queue length in
APP_SCHED_INIT( ?, ? ),
Is...
In SDK 15.1.0 NRF_LOG_STR_PUSH_BUFFER_SIZE is defined twice in every sdk_config.h in the SDK. For example in the ble_app_template/pca10040/s132/config/sdk_config.h:
Hello,
I'm trying to update an application with a dual bank over BLE, but first I wanted to try on the given examples so I'm sure that I'm creating the .zip files the...
Hi there,
we are currently looking for a suitable hardware + software with Bluetooth 5 support. All of our software projects are build and developed with KEIL MDK/ uVison...
Hello,
I integrated your firmware (iOSDFULibrary) in our project but I got error when I tried to make the DFU to our Nordic device.
Error : Error raised when the CRC reported...
Hi all, I'm brand new to embedded systems development and I'm having some issues getting the Mbed OS onto a custom PCB. The PCB we're using has a Fanstel BT840 chip.
The...
so i am trying to understand the code , and i would be really grateful if u help me .
what i am trying to do is send data from one DK to multiple DK. i am not able to figure...
Hello,
I am trying to connect RuuviTag to nRF Connect Power Profiler, but I get Failed to start the PPK error.
Computer: macOS High Sierra 10.13.4
nRF Connect v2.5....
Hi everybody!
It seems that there is not a huge choice of cross-platform frameworks to develop desktop applications for BLE (without serial dongle).
Nordic Semi seems...
Hi,
Just want to know is the pyACI is a python based tool to provision nrf Mesh Nodes over serial Port?or over PB-GATT or PB-ADV?
Can it be used to provision other vendors...
