I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
On SDK 15.2, all example have issues with all IDE on all NRF_LOG_INFO or NRF_LOG_DEBUG statements. Its an Eclipse issue as everything still compiles fine. But I can't track...
HI
I used the sniffer to get the packes of the connect, but I have some problem. As the Fingure indicats, The master set the Interval to 10ms, but the Packet Says the Interval...
Hello,
I have 2 nRF52840 Dongles. I am trying to use one to transmit 2.4GHz wireless signal and the other to recieve wireless signal and read the connection strength ...
When I call APP_UART_FIFO_INIT(), receive and transmit some data, then call app_uart_close(), I have 3.7µA sleep current. If I don't call the uart init and close function...
Hyvää päivää,
I'm moving from Eclipse to SES which on the face of it seems smoother and cleaner. My problem is figuring out how to setup my projects. If what I want can...
I am integrating app_timer with no softdevice..
Code compiles and runs correctly at the begining but it only executes the timeout_handler function once after the app_timer_start...
I'm using nRF52, nRF52832, PCA10040 with SDK 15.2.0, nRFGo Studio v1.21.2.10. Is it possible to place all 3 of the following separately on the device using the Studio?
...
The nrfutil documentation/application is used to create a .zip file to dfu update. This package may contain a combination of application/bootloader/soft device along with...
I have looked at secure_dfu_test_images\ble\ for nrf52832 and would like to create a blinky_application_s132.zip (corresponding to hrs_application_s132.zip) to do some testing...
Team,
For asset tracking I am using nRF52840 Beacons as tags in asserts and Raspberry Pi B+ for scanning Beacon's MAC, UID, Major, Minor, Tx, and RSSI values.
To calculate...
I want to send data from nRF52840 Dongle to Raspberry Pi B+, Assume nRF52840 Dongle placed in USB drive of Raspberry Pi B+. Please help with coding sample.
The code assumes that check_rollovers_and_update_eid(...) is called every second, and that m_security_slot [slot_no] .timing increases monotonically with 1. If this is not...
Hi
I have tried to run DFU example from SDK 15.0.0_a53641a.
I also use nRF Connect v2.5.0 to update firmware.
I flashed Soft device and secure_bootloader( examples/dfu...
I'm trying to enable the UART module. The function calls follow:
nrf_init -> nrf_drv_uart_init -> nrfx_uart_init
Here we see that nrfx_uart_init() is called with
result...
