When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
I know I am going to regret posting this question, but I need to ask it.
I have an application that will be put into the nrf52840 chip. It will not be upgraded over the...
Hi all, I'm having this really strange issue with the wrong hardware+software+soft combos... Last week I merged together a program that incorporates the following: SDK15,...
I am about to start a new project for the nRF52840DK using SES in Ubuntu 18.04. I would like to start with an existing application but I don't want to change the original...
Hi,
I just want to make sure about this post
https://devzone.nordicsemi.com/f/nordic-q-a/42170/is-temp-anomaly-31-applicable-to-nrf52832-qfaa-0b
static __INLINE...
Hello,
I am using the serial output logging (via UART) via the following calls/macros:
NRF_LOG_DEBUG ( " test");
Now I want to get also serial input (data from PC to...
Any idea or example for easiest way to print rotated text (only particular text, not the whole display) and inverse text(only) foreground/background colors?
Thanks
I use the nordic nrf9160 for a litle bit of time now. I had a problem and i had to re dowload the sdk tool manager. Since i tried hello world sample, asset-traker and other...
Hi
We used one German SIM card(1NCE) on both of our product and 9160 dk, in both cases the recv() hangs after the downloading started at some point. I tried all nrf sdk...
Hi, Hope you are well,
I want to test my radio function using the radio_test example but Keil gives this error:
error: L6047U: The size of this image (38900 bytes) exceeds...
Hi,
I have a client/ server question regarding indication values from both the server and the client. What is the message flow?
For example. Can the indication value...
Hi there,
I am implementing the SAADC example into my application whereby I should be able to sample all 8 ADC channels "simultaneously" at a relatively high frequency...
I am trying to change the radio Tx power in nRF5340. I'm using Zephyr HCI RPMsg for the network core. The datasheet says it should support up to 3dBm. However, the Zephyr...
In the soft device documentation (html) the message sequence diagram for Btle Stack Enable calls sd_ble_cfg_set twice with the same set of parameters. Is this a mistake? The...
Hi All,
I am developing a custom BLE profile for my current project and several of my characteristics are write/notify characteristics. I am finding that when I write...
Hi there,
I just started using Embedded Studio (v5.10d on Windows 10, nRF Connect SDK version 1.4) with nRF52840dongle and nRF5340 PDK. Here is what I did
1. Copied...
