I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
I had updated Thingy:91 nRF9160 firmware to 1.1.1 using nRF Desktop Programmer. I used the "Cellular Modem" button and attached the new file mfw_nrf9160_1.1.1.zip
However...
Hi
We are developing by connecting nRF52832 to SMT32f303cb's SPI interface.
SMT32f303cb operates as an SPI Master.
If the clock frequency of SPI Master is changed to...
Hi there,
I am using the FDS module to store some application data in flash. It is my understanding that every time the data is updated using fds_record_update, a different...
The nrf52832 defined the 250k mode in the specification, but it is Deprecated. We want use nrf52832 send data and Nrf24l01+(or nrf52832) receive data in our pruduct. We have...
In my situation, I want to use bluetooth to designed a piconet which has 1 master and up to 4 slave .
Each slave upload data 2KB/S ,and the max distance support is 10 m...
The following code is from "Boot_Loader\nrf_bootloader_app_start_final.c":
__STATIC_INLINE void jump_to_addr(uint32_t new_msp, uint32_t new_lr, uint32_t addr) { __ASM volatile...
Hi Guys ,Currently i am working project related to Bluetooth Low Energy. I want to perform Device Firmware Upgrade from (Server Side to Client Side ) need some Sample code...
Regarding I2C, the Nordic specifies a typical value for frequency in different modes (nrf52832/40); however there is no tolerance specified for the frequency. What is the...
Hello, we are trying to use a uart while minimizing power consumption. On this post
https://devzone.nordicsemi.com/f/nordic-q-a/26030/how-to-reach-nrf52840-uarte-current...
Hi,
I am evaluating the nRF52840-DK and wanted to add some debug code to the UART.
I have used the same libraries as the 'UART_PCA10056 (which works), but when the code...
Hi,
I'm using SDK5 V16 with the NRF52dk. I'm writing a SPI <-> BLE <-> USB I/O chain and am still kinda stumped by the SPI. All the examples work just fine, but when I look...
We seem to be having an issue on several Android devices, where reconnecting sometimes triggers an erroneous GATT_INSUF_AUTHORIZATION. This then causes Android to automatically...
Hello,
I am currently trying to get a project working that uses FDS, but I am having trouble getting the writing and updating working.
The peripherals in my project...
