Hi All,
I am working in the sleep mode with system off and wake up with internal RC clock.
It function well when connected to EV board...
I see the "Emulated System...
I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hi,
When the code is executed, it blocked at line
nrf_gpio_cfg_output(LED1);
where
#define LED1 NRF_GPIO_PIN_MAP(1,0)
GPIO (output) works on port 0 but not on Port...
Hi we are using the nrf9160 integrated LTE-M/NB- IoT modem in our ECG device. In USA its working fine but in Pakistan its not connecting and giving the following error: +CREG...
Hello.
Your SDK 2.1.1 ZigBee Light example image size is large, 360996 B - That will not fit on the nRF52820.
This is probably why that chip is not included in the supported...
hi support team,
customer is writing root.cart and privite.cert to our modem, it returns ok, however when customer wants to read it back, it returns error.
the problem...
hi,
I want to use timer interrupt to start PWM function, and PWM had PWM interrupt too, hoping every 20ms to start PWM function, but if I open PWM and timer interrupt together...
Hi, We've migrated our product from using two processors (a STM32F7 running the application and an nRF52832 running BLE/NFC) to one, the nRF5340. Since the nRF52832 had ample...
Hello Nordic Team,
Initially, I used nrf9160 - dk flashed with modemShell application (nrf sample project) to make LTE connection with NRF cloud but couldn't be successful...
i'm trying to install the connect SDK and tried both desktop appimage route and manual west way. but cant get to finish downloading the SDK on clone stage... is there a way...
I'm having issues with the latest v3.0.4 nRF Connect Programmer. This issue never happens with the previous version. The Programmer cannot discover any J-link devices, except...
Hello,
We noticed in the nRF5 SAADC libraries the presence of a low_power bit setting on the nrf_drv_saadc_config_t config.
But, we were not able to find such low_power_mode...
I'm using nRF52810 for my custom board, followed complete reference circuit for DC DC
I want to know if I want to power the chip with coin cell 3.3 V, Can connect it directly...
Hi,
Our custom board stops working sometimes.
At this time, when the power is rebooted, it operates normally.
--
Custom board maker is not addressing this issue...
Hi,
SDK 17.1 has 2 example projects (Blinky) that exchange LED and Button state data. As it stands, the Peripheral side contains the LBS server and the Central contains...
Hi, I'm currently trying to send real time analog sensor data to hivemq broker using nrf9160 DK, is it possible to provide source code for this kind of project? I've attached...
