I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
I'm building a project for the nRF52832 using the NRF5-SDK version 14.0.0. I'm compiling using GCC 6.3.1 ( arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors 6-2017...
Hello,
We are using the AWS library on a Thingy91 to enable FOTA. We have a working example where we store the bin file in S3 as instructed in the SDK documentation.
Now...
Hello, I am trying to use the Peripheral UART code with the nRF9160-DK. I followed this guide https://devzone.nordicsemi.com/nordic/nrf-connect-sdk-guides/b/getting-started...
Dear All, I was wondering if you could provide any examples or advice as to good practice techniques when using the Watchdog timer in a multi-threaded Zephyr application.
Hi all,
I'd appreciate some help on the following problem:
I'm trying to put a custom hardware into a low power sleep mode from which I want to wake up regularly. I’m...
Hello
I am doing a project need to implement firmware update from the application
and I reference bellow thread,
https://devzone.nordicsemi.com/f/nordic-q-a/68368/write...
Hi, I am trying to build the light switch server in the nRF for Mesh SDK, but I cannot generate the SES build files using cmake.
I am receiving the following error
CMake...
My central and peripheral are continuously connected at 1sec connection interval to conserve power on both devices.
When a button is pressed, I would like to exchange data...
I don't fully understand datasheet for LFXO.
17.4.3
CL_LFXO Load Capacitance = 12.5pF. Is this the recommended CL for external crystal?
RS_LXFO ESR = 100k. Is this the...
Hello everybody,
I'm developing a webapp that need to communicate with my BLE device, an nRF52 DK Board.
The firmware has some open and some encrypted characteristics...
