Hello,
i would like to know if the new SoftDevice 130 for the nrf51822 is compatible with the DFU OTA bootloader example provided in the SDK (nrf51822/Board/nrf6310/device_firmware_updates...
Can I get uuid of central device from peripheral device(nrf51822) ?
I want to check out which smart device is connected.
May be I can tell central is iphone4s or iphone5...
Recently s110_nrf51822_7.0.0 softdevice has been released. I cannot find specification where those new amazing features (they are impressive, indeed :) ) are described, so...
Hi All,
Please correct the following in my understanding. Also , i am planning to build a
remote controlled device using a PWM output. How does ATT,GATT and GAP affect/influence...
My board works most of the time are very good，but one time i power down the board when ble connecting and data transmitting，the board can't work when power on.and i can't...
Posting this as separate question as it got no traction in the other thread:
Why are there many of the same include files in the DFU example directory as in the S110 7...
I am developing a product using the nRF51822 BLE, I was able to interface all my peripherals and setup the softdevice stack accordingly.
Now I am looking to add a pairing...
Hi Dev team,
I have an application working on the Thingy91 that sends the data of the sensors through MQTT to our server. I was interested in knowing the data usage of the...
Hi All!
I'd like to ask if anybody succeeded running zephyr without optimizations?
For ex. i have a following code:
Now i have following problems: 1) If i set...
Hi,
We got carrier frequency tolerance failure in a certification test.
The max deviation should be under 20ppm, but the result is above 30.
We used DTM example...
I'm working in a project where I have to use produce a PWM signal which actively drives the pin low for 0, and disconnects the pin for 1. The PWM is generated by an in house...
Dear Members,
For checking my LF 32KHz crystal is working,
XL2 is the output of the crystal ? or vise versa ?
So XL2 to the scope and the other probe to the ground...
Greetings,
I'm trying to develop a project on the nRF5340 DK where I collect measurement data from an I2C sensor (LPS27HHW) before sending the data via bluetooth. My firts...
Hello i'm trying to run a sample from my projects but each time i'm getting the CMake error i tried changing project and running from another directory but the problem still...
Hello,
we try to add DTLS to the CoAP client example . We have problems with the DTLS connection. The handshake with PSK works. The first CON or NON query works also without...
Hi! I developed a locator and beacon pcb boards for AoA direction finding using the NRF52811 chip. The locator has 4 patch antennas and the SKY13575-639LF external antenna...
Dear Members,
I want to use MAX17048 and getting thiis message :
<error> app: ERROR 33281 [NRF_ERROR_DRV_TWI_ERR_ANACK] at ..\..\..\MAX17048.c:71
void MAX17048_init_i2c...
I have found an issue with ESB/Nordic radio where it will receive a packet on the wrong pipe. I think the issue occurs when the prefix array set to the PREFIX registers contains...
While testing our custom Hardware with the nRF52840 in a climate chamber in the -40°C to +85°C range i noticed that the value read from the internal temperature sensor was...
Hello,
let me explain my problem as below.
after doing pairing between nrf52832 and phone(android app). phone is central (including scan behavior)...
after success...
