Hi all,
I have compiled the ble_app_hids_keyboard example for a nRF52832 on a Laird DVK-BL652 breakout board.
I have a tablet running android 5.1.1 and the nordic nRFConnect...
Hello All,
We are using nrf52840 board interface with wiznet550i.
We try to implement mqtt tls 1.2.we get following errors..
I get certificate verification error -0x2700...
Hi,
i am using SDK v8 with softdevice v8,using master control panel pc application,added custom service and characteristics to application,problem is characteristics value...
There is the board mark on the chip like n51822CEAAD01350A0, where DO is Build code, 1350 is tracking code(YYMM), A0 is lot code.
My question is how can I get those codes...
I'm trying to debug a randomly occuring Hardfault. In trying to trace down the source I read the CPU registers use the Nordic hardfault_implementation.c which grabs the register...
Dear nordic employee
my purpose is send a data the length is from 150 to 273
when my server device send data by sd_ble_gatts_hvx（the send length is fixed 10 bytes） ...
Using nrfutil to flash devices via BLE requires, as per `nrfutil dfu ble --help` a second device to be present, and an inordinate amount of additional dependencies which make...
Hi!
We are using the nRF52840 for developing a product, and for testing purposes we would like to have the possibility of setting individual GPIO pins on the 840 chip...
Hello everyone,
I've been messing around with a nrf52840 dongle we've got in our company and I wanted to restore it to the original state, but I cannot find the hex file...
Hello,
I've uploaded the Asset tracker example via SES version 4.20a. Uploading works just fine but when I open LTE link monitor, I see that the board constant reboots....
Hello,
in my application I want to power the nRF52840 with USB at the VBUS pin or a 3.3V external supply at the VDD pin.
I wonder what will happen if someone plugs in...
Hi,
My problem is that reader sends PPS command (both DRI & DSI set to 0) for which there is no response/confirmation from library, and I don't know how to implement this...
Goodmorning, I have a new Thingy 52 and I can"t get it connected to my phones. The old phone has Android 4.2.2 and the new one Android 10. On the I Phone it works perfect...
Hi
I am using Nordic softdevice S340 for developing a proximity search project. The softdevice function "sd_ant_prox_search_set (uint8_t ucChannel, uint8_t ucProxThreshold...
Hello,
i am currently trying to add my own model to the Mesh Android App. It should just be a simple sensor model.
It already works to have an own Window, where I can...
I want to store data on a specific location in Flash, so it is available later on in a bootloader. The size of this data can be quite large (~ 300 kB). I'm kind of puzzled...
Hi,
I've developping a firmware for the nRF52832 with the nRF52DK and it work on this board and on an external BLE module from EBYTE (E73).
I want to flash an other hardware...
Hi,
In our one of the product we are using Nordic nRF52840 MCU and we compiling this application code in windows with SEGGER Embedded STUDIO IDE Version 4.30a and Tool chain...
Hi,
I'm currently developing a custom bootloader for DFU, using I2C.
The bootloader is based upon the secure UART bootloader for nRF52832. Transferring and writing the...
Hi Nordic Team,
In the recent Nordic APAC Event, we got nRF52840 Dongle and we would like to use it as BLE sniffer.
Can you please point out some resource/link which...
