SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
Hi:
nRF52832 SDK17.1.0\examples\peripheral\spi\pca10040 , Is the maximum frequency of the SPI in here only 8M?
The following screenshots:
Can't the frequency be set...
I cannot add new devices on the nRF Cloud anymore.
After (intensive) trials with the cloud the Account screen changed and the relevant input fields are missing.
Therefore...
Hi all,
I occurred a weird phenomenon while debugging custom nRF52832 board.
Basic idea is to enable ADC(including nRF52832 ADC module and a LDO powering Analog front...
In nRF Connect 3.7.0 I'm trying to configure the NRF Matter cli as described:
github.com/.../nrfconnect_examples_cli.md
In SES I changed CONFIG_CHIP_LIB_SHELL=y:
After...
Hi,
Our product has the nRF52840 with onboard BLE antenna.
As the BLE link is on and operated i.e. communicates with TWN pad the wireless Microsoft keyboard and mouse...
Hi, nrf5832 nRF5_SDK_17.0.2 Application: we need only advertising every 10seconds, but not power optimized. The main goal is consume as low power as possible. We followed...
Hi,
I would like to know why FDS_CRC_CHECK_ON_WRITE and FDS_CRC_CHECK_ON_READ are 0 by default in the sample code. I think it's better to set it to 1 by default for write...
Hi,
I have a question about the nRF5340 pdk device and the supporting documentation.I want to know the maximum current of nrf5340pdk's GPIO, but it is not stated in the...
Hi,
what is the reason that the TX power of +8dBm of nrf52840 was reduced to +3dBm for nrf5340?
Does this mean that the transmission distance is almost reduced to half...
I have a custom nRF52833 board that acts as an HID device, which works perfectly. I now need to get values from the USB to the serial monitor for easy debugging purposes....
i found that 52832 will always restart while power supply voltage between 0.6V - 1.0V。if lower than 0.6V or higher than 1.0V. it won‘t happen。my pseudo code is follow：
power...
Hello everyone,
I'm using the NCS/Zephyr settings subsystem to store some application data in non-volatile memory.
The settings structure looks something like this:
...
I'm working on ncs 1.6.1 and nrf9160-DK.
I need to use SPI1, so i confirmed that UART1 is already disabled by default in ncs\v1.6.1\zephyr\boards\arm\nrf9160dk_nrf9160\nrf9160dk_nrf9160ns...
