I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Hi,
I have a problem with the mlme_start_req:
I have defined the following structure for mlme_start_req_t:
#define SUPERFRAME_ORDER 15u
#define BEACON_ORDER 15u
...
Hi.
I was wondering if there are any options in the pipeline for the nRF91 series. Any pin-compatible variations of the SoC, like a device without GPS or BLE or other...
I using the nRF mesh SDK v2.2.0
I do the below steps:
- Provisioning the light node by the interactive PyACI
- Configure the light node
- Can the node with PyACI using...
My simple BSD socket example does little more than send/recv a message to a server over LTE (it's adapted from Rallare's tcp sample). It works, however the recv() call does...
Hi,
I am developing firmware for a custom NRF52840 based board. I am using softdevice 6.0.0 with SDK 15.0 and the SES environment.
I am trying to use three application...
Hello, My name is Rafiul Islam, and I am a part of a Capstone Engineering team at Simon Fraser University (Vancouver, Canada). For our capstone project, we are expected to...
Hi,
I have the simplest of SAADC sampling scenarios whereby I'm sampling a voltage in a one-off manner, nrf_drv_saadc_init, nrf_drv_saadc_channel_init, nrf_drv_saadc_sample_convert...
Hello,
I am using NRF52832 and nRF5_SDK_15.2.0 for the our device.
I am using FreeRTOS also.
I have some issue about sleep mode with FreeRTOS.
I refer to some suggestion...
Hello,
I'm having a weird issue that I'm not sure how to debug. I have an app that I know works fine if programmed just with the softdevice. However, when I also program...
Hi,
I want to implement the tap sensing in my product. for that i have BMI160 accelerometer for tap detection interrupt.
during wake up time i need to read the accelerometer...
Hello,
I am interfacing some chips + sensors to wirelessly communicate to an nRF24L01 connected to an arduino nano which is pluged via USB to a computer.
This nRF24L01...
Hello,
I'm trying to work with ADC on nRF9160DK and I'm using 3V for VDD IO;
With below configuration
I'm getting full scale reading at 640mV
When I've switch to...
Hi,
Our product is based on peripheral device (nRF52840, SDK 1.5, SD s140) and in-house PC (windows) / mobile (android) applications.
We plan to implement bootloader ...
I need to show a proof of concept for a product development decision of a new development project.
The PoC consists of connecting a (very special) BLE central device (named...
