Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hi,
I'm working on porting my software projects from NCS2.9 to NCS3.1.1 and run into the problem that the thumbs nrf52840-dongle and arduino-nano-33-ble are not booting...
Hi everyone, My teammates and I are currently developing a BLE Mesh–based application. At this stage, we’ve run range tests to verify connectivity performance. As a baseline...
HI
I am currently using the 3.0.0 SDK's periodic_sync_conn and periodic_adv_conn examples.
In the periodic_adv_conn example, I have configured 100 subevents.
Below is...
Hi Nordic team,
I’m working with raw IQ data from the nRF5340 using the Distance Measurement (nrf_dm) library.
I noticed that most IQ samples (both I_local, Q_local...
Here is the Java error message box
A couple of interesting things:
1) Wasn't that stupid of me to mention a Java error when the Error box reported a JavaScript error...
Hello,
I am at the very, very early stages of my project, doesn't it even a name yet. Right now I am thinking of using nrf52840 for a Bluetooth operation while being supplied...
I try to use the PPK2 to measure current of a MCU in sleep. The board has some caps and a coin cell to keep the RTC on chip alive. It wakes up every 1 second to check wake...
I am trying to get an end to end BLE application working. I have an nRF52832 board that is running peripheral_uart. It is advertising and sending a text stream to the connected...
Hi,
We are using a NRF54L15 device as an SPI slave device communicating through an other SoC as SPI master. This SPI master device emits periodic SPI messages at indeterminate...
Hello,
my dev board is nrf5340dk.
I took a sample that under zephyr handsfree_ag. In build configuration I added nrf5340dk/cpuapp. I have built and flashed my dev kit...
Hi,
running the script from the SDK 2.5.0:
imgtool verify netcore.bin
I get the following result:
Image was correctly validated Image version: 3.1.9+0 Image digest...
Hi, I am working with the nrf7002dk getting MQTT working with TLS and Azure IoT hub. It works OK with ncs 2.9.1, but using ncs 3.1.1 there are errrors. I have been following...
Hi there,
Under lesson 3 of devAcademy
https://academy.nordicsemi.com/courses/nrf-connect-sdk-intermediate/lessons/lesson-3-adding-custom-board-support/
There is an...
