Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello Everyone ,
By using sdk version 15 for NRF52840 I wish to connect the lsm9ds1 sensor to it and using seggar embedded studios IDE. The header files available in google...
Hello, what is the best way to provide optional enable or disable option for a user in terms of keeping BLE module powered on or off. I am thinking of 2 options , can you...
Hi everyone,
I'm currently working on a nrf52832 board and i got an issue on Gpio config after a reset.
I configure a gpio with a register value of 4, low level, output...
Hello. I am reading this manual infocenter.nordicsemi.com/index.jsp and trying to compile but there is an error durring linkage phase, Linkage nrf_init: undefined symbol ble_conn_params_init...
Hello Nordic team,
I already managed to get into DFU bootloader using buttonless DFU service, and successfully triggered application uploading process, but the system randomly...
Hello, To use the nRFMesh app which Project needs to be flashed to the Nrf Board ( I have nrf5832) . I see there are following workspaces : (1) nrf5_SDK_for_Mesh_v2.1.1_src...
Hi,
Board PCA10056. PC: Windows 10 BLE 5.0 - Intel AC9250. Any examples from nRF5_SDK_15.2.0_9412b96\examples\ble_peripheral
When I trying to connect from desktop to PCA10056...
What happens: if I send a serialization packet whose last byte is SLIP_END (0xC0) or SLIP_ESC (0xDB), the program crashes in an assert in ser_hal_transport.c:141.
Why: The...
Dear nordic,
I need a help to working nrf52840 dongle. It's not working when i press reset button led not flashing.
i don't know what happen to dongle can you help me...
Hi All, I am working on a problem for last 2 days and cannot find a solution, I tried everything and read many posts from others however nothing worked so far, either it seems...
So, another 2 hours down tonight converting to NRFX, this time it is trying to get the SPI to work.
This line -> static const nrfx_spi_t m_spi_master_0 = NRFX_SPI_INSTANCE...
Hi,
I'm trying to use twi and spi in the same project. But it results in this error:
.\_build\nrf52832_xxaa.axf: Error: L6200E: Symbol SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler...
according to this article to modify my code. https://devzone.nordicsemi.com/f/nordic-q-a/27185/52810-how-to-use-dfu
It could be scanned but couldn't connected.
Is...
Hi Nordic support,
I have a nRF52840-Preview-DK. When I try to connect to nRF Connect on my Mac I get the following error: "Error while probing devices: Error occured when...
Hi Guys,
I hope that you could help me with issue which can be observed in my new "nRF52 setup". I've connect LSM9DS1 sensor to NRF52 DK. The "twi_scanner" example from...
