When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
On SDK 2.0.2, I was able to load peripheral_uart with CONFIG_BOOTLOADER_MCUBOOT=y and successfully update both the app core and net core using the thingy53. However when moving...
Hey,
I bought a device which uses the N52832 SoC, Im gonna attach a photo of the device. Is it possible to get the code from the device, modify it and then upload it to...
Do you know of any way of reading the installed modem version of an un-locked nrf9160 through the j-link programmer. I would like to conditionally program the modem firmware...
Hello ,
I want to use OLED display having SSD1351 driver with nRF52832 DK board over SPI. Is there any library or support available ? Please help to share if it is available...
Hi,
We have a peripheral based on the nRF52840 which connects to a smartphone as the central.
Following the guidelines for iOS we have selected a connection interval of...
Hello Devs,
I am testing an nRF52840, configured to operate to 1.8V using the DCDC converter. All pins are supposed to operate in a 0-1.8V range.
So my question is...
Using 52840, I would like to drive an external device at 800Khz
Works well without enabling the SoftDevice
But once the SD is enabled - this does not work
Ideas?
I used 9160 to develop a product for the customer. Previously, I used ncs1.2.0 SDK, and the power consumption of the whole machine was about 200uA. Now I am going to use ncs1...
Hi mate,
I followed the link (+) Add DFU support to your application - Software - nRF Connect SDK guides - Nordic DevZone (nordicsemi.com) step by step and its worked...
Hi mate,
I followed (+) Add DFU support to your application - Software - nRF Connect SDK guides - Nordic DevZone (nordicsemi.com) your instructions and successfully implemented...
We found that when testing the nRF52832 chip, if the C9 capacitor is empty, the chip broadcast power consumption increases from 20uA to 40uA, and the power consumption of...
Hello,
Over the years we've occasionally been experiencing a issue with nRF52840 and nRF52832 chips in case of which any BLE activity would stop happening. A chip mounted...
