We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
During a review of production firmware I noticed an oddity that should cause a compiler error but it somehow does not.
In C, a function may not be overloaded. There are...
Hi,
My customer is trying to use both UART peripherals on the IC and have VCP on the USB, for a total of 3 “UARTs/COM ports”.
Can the USB be instantiated for VCP? if they...
Hello, I'm currently implementing BLE after I made the NRF51810 custom board. We are testing with the BLE example BLE UART with SDK 17.1.0 VER. The current setting is as follows...
Hi folks,
we're running zephyr v3.6.0 on ublox-anna-b412 module which embeds nRF52833. For our application we need multiple timers enabled next to running ble. When we were...
Hello everyone,
I’m working on an asset tracking project using the nRF9160 as my microcontroller. However, given my limited experience with RF design, I have a few questions...
I have an nRF52840 that is on an Ezurio BL654 module that I have programmed dozens of times during development. Something happened during a recent programming event that caused...
Following the instructions for building chip-tool, I get a build error.
[~/git/connectedhomeip] scripts/examples/gn_build_example.sh examples/chip-tool examples/chip-tool...
Hello, we've successfuly been using SMP to update our peripherals so far. Now we've come upon an issue. If the software has a bug, and the device disconnects or reboots during...
I'm currently using nordic's SDK7.1 to open a device, and I want to use features like GPIOTE, but I don't find SDK7.1 to be as good as GPIOTE as the older SDK. Who has a useful...
Just posting this as new issue since it is still valid and installing the SDK tools again every day sounds a bit drastic.
Error when creating trace: unable to locate db...
Hi, I am using light lightness server example for the testing of DFU OTA over mesh. I have successfully transferred the DFU archive over serial with nRF Util tool and follow...
Hi,
I am trying to implement the ECDH functionality in the TF-M application.
I am referring Crypto: ECDH (nordicsemi.com) and in the build target I see, the example can...
Hi, We have a few questions regarding the pm_static.yml file that's used for defining flash partitions in zephyr. Our main questions are regarding alignment; we've created...
Hello, everyone, I am a fresh guy using nrf toolbox to read UART (52833) logs.
Now I can get data via nRF-Logger from GooglePlay store, and I hope to develop
real-time...
Hello I want to make an application that will be sending data from 3 peripheral BLE devices to the central device which wil be connected to PC and transmitting data (from...
