Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
During the setup process for nRF Connect SDK v2.4.0, an error occurred preventing the SDK from installing correctly.
The environment details are as follows:
* macOS...
Hi, i am using "mesh provisioner" example in nrf52840. ncs v2.2.0 i am trying to provision nearby device, that is also nrf52840 running "ble_periphera_lbsl_coex" example....
Starting with the unaltered application template 'zephyr/samples/bluetooth/mesh', I attempted to add DFU support by following this guide .
I added the following lines to...
Hi Everyone
what are the common patterns for implementing UART on zephyr rtos-based system using the mesh stack?
I use uart async APIs, here my implementation...
step...
Hello all,
I am working on a custom Hardware Design which use the nRF9160 SiP as the host controller and the nRF7002 IC.
The nRF9160 VDD VDD_GPIO is powered by 3.3V...
Hello,
I have been using the SPI manager to share the same SPI bus between several devices. (high speed ADC and NAND flash) The ADC sample rate is 260 samples per second...
Hello,
I've been evaluating the NRF7002-DK with 2.3.0-rc1 SDK. Although there's almost no documentation on how to use Noridc's WiFi stack (at least I haven't found any)...
Hi,
Now that I've got my board with an external MAC/phy working with my nRF52840 to do a TLS-secure http_get from google.com, I'm trying to learn about how to do proper...
info: my board core is nrf52832
i want to use examples\ble_central\ble_app_uart_c to connect with a Slave，i have only modified the UUID,and it can connect ok,but when it...
I do have different issue with Nrf52810. I am trying to build a wearable device with NRF52810 and LSM6DSMTR. I am measuring the current towards the NRF52810 using a series...
Hi,
I need to send more than 256 bytes by SPI using the nrf_drv_spi_transfer() function.In this case is for programming or reading a 256 bytes page in a SPI Flash chip....
Hi, I am new to the NRF environment.
I am working on a nRF5340 project where I need to generate a 3MHz clock for data communication with 50% duty cycle, I see only even...
Hi,
We are developing an asset tracker using nRF52840 and a Telit modem.
Is it possible to use AWS FOTA library (AWS jobs + FOTA download) to do the application firmware...
I'm using s140 on an nRF52840 and running into a hard fault when trying to malloc 20 bytes. (Yes, I know about memory fragmentation; it's not a concern here.)
app_error_fault_handler...
Hi everyone.
I am running a BLE mesh stack in my Zephyr-based application and need to interface with another device using UART.
How can I implement UART communication...
