We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
Using nRF Connect SDK v2.2.0, I am trying to use the peripheral_lbs sample code.
I am building and flashing the example on my custom board with an nRF52832 rev 1....
Hi,
We moving to new SDK and I'm failing on building with VS, previously I was with 1.9.1 and Segger so had no problem
" ninja: build stopped: subcommand failed. FATAL...
Hi,
I am developing an application on top of low power node example with nrf sdk for mesh. Idea behind the application is that, after provisioning and model publication...
I'm trying to integrate the Micrium OS-III USB stack into my product using a custom USB driver abstraction later. The USB class is mass-storage if it matters but the problem...
Hi,
I am working with NCS 2.2.0, nRF52840 dev kit, Visual Studio Code for nRF. I am trying to configure any of nRF Thread examples that are part of NCS 2.2.0. I am getting...
Hi,
We use Zephyr 2.02 and change bt name dynamically in advertising data without rebooting. When system power up, bt name will be set into NFC by NFC init api. However...
I'm trying to use simultaneous FOTA update of both cores with NRF5340DK, and there is a strange behavior with any update with modification - the uploading from mobile app...
Hello,
I have followed this guide https://devzone.nordicsemi.com/guides/short-range-guides/b/software-development-kit/posts/getting-started-with-nordics-secure-dfu-bootloader...
Good day,
After having successfully created a build of the sample "blinky" and then successfully created a build of the sample: "Bluetooth: Peripheral UART" , I tried to...
Good day,
I intend to use the hardware design files of the Nordic Thingy:91 prototyping platform to produce initial prototypes of my own product: Bluetooth gateway.
Do...
Hi,
I am stuck with this project, I am trying to create a touch LED PCB design. Its a smart LED controllable through mobile. I am using NRF52832. Now I want to create its...
Hi,
i am working on a project using the nRF52832 SoC. I had to design a custom PCB for my application as shown in Scematics.
The issue is not the hardware though....
Hi,
I am trying to get the data from the Lidar Lite V3 sensor via the I2C bus. However, I only receive a 0 back. So my question is the implementation generally correct?...
Hi All,
When my BLE device call data update function, the error code would return ERROR 261893 as shown below image
If I remove the err_code checking, the code is actually...
Hi,
the default baudrate for log output is 115200, but I find a lot of messages dropped, so I want to modify it to 1000000, how can I change it in code? thanks.
