Hi All,
I am developing a BLE scanner/observer application on nRF54L15 using nRF Connect SDK, Zephyr, and SoftDevice Controller (SDC). In the scan callback ( bt_le_scan_recv_info...
Hello Support Team,
The customer reported that the nRF54LV10A-QFAACA seems to automatically enable APPROTECT. The customer assembled their own boards with the nRF54LV10A...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
When I was connecting my PPK2, I accidentally refreshed the PPK2 firmware using Bluetooth Low Energy. After that, the PPK2 port can't be recognized. What should I do to recover...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
the official way to build zephyr projects with nordic ncs seem to create some magic shell:
nrfutil sdk-manager toolchain launch --ncs-version v3.4.0 --shell
however...
Hi all!
I am developing an application with Zephyr (commit b21a91e46833cfcf4f2bda9e3e0f9d8c2150882e) on nrf52833 and a Ublox SARA R5. I communicate with the module via the...
The goal is to push a blob to a azure storage container using https on nRF9160.
I am using the nRF/zephyr socket library to do basic HTTPS POST/PUT
CONFIG_NET_SOCKETS_OFFLOAD_TLS...
Hi.
I'm trying to flash a sample image to the Thingy 53 using the nRF9160DK (assuming this is possible and it's not mandatory to use the nRF5340DK), but when I try to do...
Hi,
I am trying to run the peripheral_uart service example, with the hci_rpmsg on the network core
When the clock configuration (on the main application core) is set...
I use iOS nRF Connect APP to do nRF52832 device DFU. DFU is completed successfully. But the following error occur.
<error> app: Received a fault! id: 0x00004002, pc: 0x00000000...
Hi,
I want to write Bluetooth ON and OFF functions for the project purpose,
what are all the steps needs to follow while creating ON function and same for OFF function...
Hi All, Today I am migrating my project from ncs 1.9.1 to ncs 2.0.0.
The project was building find with ncs 1.9.1
But I do got this with rebuilding with ncs 2.0.0 (I did...
Hi All, Today I am migrating my project from ncs 1.9.1 to ncs 2.0.0.
The project was building find with ncs 1.9.1
But I do got this build warning with ncs 2.0.0: Any idea...
Hey guys, I was looking for a similar issue, however, I haven't found something like this (maybe I am searching for a case similar to this in a wrong way) But essentially...
hi all,
I learned that the Zephyr controller can connect to more than 64 slave devices and was wondering if it can simultaneously connect as a slave to the phone via ble...
Hey Nordic,
I am using
SDKv17.1.0
VSCODE as IDE
S140 as softdevice
Windows
Let me first insert my code snippet:
Here, NRF_LOG_INFO() function works, meaning...
Hello, I am trying to save data on an microSD card using SPI1. I am following the firmware in this discussion Working NRF9160 SD Card Example on SDK 1.9.0 . In addition I...
Hi! I used NRF CONNCECT to connect the Power Profiler Kit II, I opened the "Bluetooth Low Energer" app by mistake, and received a prompt to update the firmware. I chose to...
