Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
I am working with STM32-F401Re with IKO1A2 shield on it as well. I implemented the machine learning core on LSM6DSOX and I get the data of that accelerometer on STM32 F401re...
Hello, I'm in the process of attempting to implement Eddystone EID on the nRF52805.
It's been a bit of a nightmare, so I'm finally taking the bold step to make my first...
Hi,
I am using the nrf52dk_nrf52832 board and adding a peripheral SPI Flash. I had previously gotten the SPI Flash to work but now it does not.
I've hooked it up to the...
Hey guys,
I have recently been using the nrf 52840 dongle to connect to a sensor and gather data from it. So far I have been able to successfully connect to the device...
Hi,
I see that there is Zephyr I2S support in in NCS 1.8.0 (and onward), but I can't locate any reliable documentation for the API.
I have an I2S example (based on https...
HI
I having issue when setting 18 BLE links using s140.
I set the ram size as suggested but still getting error.
<debug> nrf_sdh: State request: 0x00000000 <debug> nrf_sdh...
Hi!
I am using the Serial LTE Modem application from the nRF Connect SDK v.2.0.0
In the source code for this app, every call to:
int util_resolve_host(int cid, const...
Hi,
I'm a student and this is my first project on RF. I'm prototyping my own custom board. I did read in the papers of the quarterwave 2.45 GHz antenna that the PCB should...
Hi,
I am trying to understand either the timing or feature I am missing with respect to LTE, GPS and MQTT. I have read a number of posts and questions on a similar topic...
Hi, I am testing out the UART Peripheral sample on the nRF52840 DK. Since I am communicating with another MCU, I have remapped the RX and TX pins to P0.26 and P0.27 respectively...
The MenuConfig page of SEGGER IDE (ncs1.9.1):
How should I configure this interface if I want to configure usb DFU and trigger upgrade mode via button: 1.boot_usb_dfu\Use...
I am trying to flash blinky program to nRF52840 Dongle using nRF52840 DK thorugh SWD pins. I successfully implemented that using Segger Embedded Studio by following the steps...
I am working on a project that is being ported from the nRF52840 to the nRF5340 and the once unified radio and app codebase needs to be split to the app CPU and network CPU...