I requested a SUPL client license as I want to evaluate the AGNSS feature, but it got declined for some reason. And when I try requesting another one, nothing happens. Does...
Hello.
When I ran the NCS SBOM command using VS Code, the following error occurred, and the file could not be generated.
I would appreciate it if you could tell me how...
I am using nRF Connect SDK 3.4.1 on three nRF54L15 devices:
A ───────── B ───────── C
A–B: A central / CS initiator
B peripheral / CS reflector
B–C: B central / CS initiator...
Hi,
I have been using NRF PPK2 for two months,
today when the device was connected to docking station and only ground to DUT I notised " High current surge in the USB...
Hello,
I cannot download many of the applications offered in the desktop. I am trying to use the evaluation board for the nRF54L15 offered by ezurio (BL54Lu) and cannot...
Setup
- Programmer: nRF54LM20 DK (PCA10184), debug out header P13 to an external board over a 10-pin ribbon under 10 cm, SWD0_SELECT grounded on the target side. The DK...
I created software and flashed successfully to the nRF54L15-DK. It is to toggle an LED on and off on P2.09.
#include <zephyr/kernel.h>
#include <hal/nrf_gpio.h>
...
Hi Team,
I am using nrf52833DK, nRF5 SDK for Mesh v4.2.0 and nRF5 SDK v16.0.0.
I am trying to implement mesh DFU, but the DFU is stuck at the 35th segment. When I probed...
Hi,
I want to use UART to send and receive data, so I refer to ble_app_uart example to add the UART function to the ble_app_hrs_freertos, but I found it returns error...
Hello,
I am currently trying to get a slightly modified version of the blink example from zephyr to work on the nrf5340.
As you can see below, I am starting two threads...
I want to use the OTP register for production, but I don’t have permission to read the contents of the OTP register。
The following are my steps:
1.Allow the UICR area...
Hi,
I have a question regarding the nRF5340 Development Kit.
I use nRF5340 in the BLE Central role, I'm using a similar code like in the example central_bus.
Sometimes...
We have noticed that generating LE Secure keys [ nrf_ble_lesc_keypair_generate() ] takes 2.5s. That causes our external, 1s watchdog to trigger. Is there any way to improve...
Hello,
I was going to email my local FAE about this, but figured I would post it here for anyone else who may have the same/similar question. To preface, I have reviewed...
Hi,
Of late, I've been evaluating Zephyr in its support of the nrf5340. I've come across several deficiencies that need to be addressed:
1. All callbacks (for the most...
I have an application for NRF5340 which I was trying to add BLE HCI RPMSG into the network core. I went ahead adding the necessary build configuration in such a way I would...
Hi Team,
Recently, I am developing spi functions. There is a function that makes me confused --"nrfx_is_in_ram".
I am not clear that what types belong to RAM data. ...
The datasheet for the nRF52840 states, in section 5.3.6.7, what retained registers do and then, rather unhelpfully, states that details can be found in individual peripheral...
Ian currently using Nrf52840 development kit and SDK 4,0 fir the zigbee and the thread. SDK 4.0 is being used for the project due to some functions that are not present in...
Dear NCS experts,
When trying to debug in VSCode by hitting F5 (or Menu: Run->Start Debugging), compilation fails with: fatal error: zephyr.h: No such file or directory...
