Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
We are developing an application based on the nRF9151 using NCS 3.1.1 and modem firmware mfw_nrf91x1_2.0.3 .
We would like to use Proprietary PSM to control the modem's...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
If I leave the CE pin in a HI state, and assuming I have the PWR_UP = 1 and have loaded the Tx FIFO with data, will the data be transmitted by merely setting PRIM_RX to a...
I've paired ble device with android and then device went out of range and wen ble device comes into range device will connect at that time do we get any callBack???
Hi,
I'm looking at increasing the sensor update rates for the Thingy:52, and get more frequent readings into the sample app. Let's assume I want to change the temperature...
I've been trying to use the Device Manager to store and recall bonding information for use in whitelists. Unfortunately the dm_whitelist_create function always seems to return...
I have recompiled the secure boot loader, s132 and it works great on the dev board but not on my board. The difference in boards is minimal with the exception of the fact...
Hello Everyone,
I have a basic question related to custom BLE service 128-bit UUID.
I know the custom ble service base UUID is the "00000000-0000-1000-8000-00805F9B34FB...
Hello,
We are trying to change Connection Interval when both of Central and Periphera become Sleep mode and either of them becomes Active mode to reduce Power Consumption...
Hello everyone,
My IC description: nRF51822 QFAAHO, which belongs to IC revision 3 and, as the PANv3.0 says, "1V2 + HFCLKarerequested always when the GPIOTE task is configured...
I am using nrf51822 with SDK12.3 + S130 as a BLE peripheral device. I want to pair it to multiple central devices and use button to switch between them.
I tried to filter...
I have designed my own custom PCB with nrf52832 . The schematics of my PCB is attached with this post.
I am programming the soft device hex file but not initializing it...
Hi,
I want to implement Server/Client model light switch where all nodes should receive the state from all.
How can we read the state of one client on another client...
I have custom hardware that is working fine. No issues. I can program, erase, debug with no issues. I have been working on making some changes in the bootloader, and I've...