Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
I have been trying to get MQTT+TLS to work on the nRF7002 DK and haven't been able to get the samples to connect to the MQTT Broker.
Is there a working MQTT TLS example...
Seeing the failure below and wondering a couple things:
How did the device get into this state?
How do I disable AP protection? The Kconfig GUI seems to indicate that...
Hi all,
I'm working on a custom board based on the nRF9160 and using nRF Connect SDK v3.0.2. We’ve developed the board in-house and integrated the npm1300 PMIC as part of...
Hello,
For our emission tests in an anechoic chamber we need to be sure that the BT antenna is up and running. Of course we cannot connect via BT from outside the chamber...
hi support team,
docs says we can program 54l15 external spi flash ,please refer to : https://docs.nordicsemi.com/bundle/nrfutil/page/nrfutil-device/guides/programming_external_memory...
Hello.
It is possible to overwrite the contents of the memory using a 32-character string permitted by the standard for mf_name and model_id fields from zb_zcl_basic_attrs_ext_t...
I have for a long time been using the PCA10040 DK to program my custom board with nRF52840.
This has been working flawlessly.
HOWEVER, after I updated nRF Connect to...
i have integrated the uart relevant parts from the app_ble_uart example to the pwm_driver example, i did the modifications to the sdk_config and defines
i get an error while...
I've been looking through the twi_master_using_app_twi example and been trying to change things around for use with a TMP116 instead of a LM75b. I noticed from the LM75b's...
I have been searching for the best way to authenticate / authorize a mobile phone with a nRF52 device without much luck.
I would like to ensure that only the owner of the...
In my situation, I want to use bluetooth to designed a piconet which has 1 master and up to 4 slave .
With yours suggestion,Now i make it work,in upload from slave to master...
I want to include a timer within a structure and also within an array. However the SDK uses a macro to define the declaration of a timer. App_timer.h recommends not to define...
Hi,
I am using nRF52840 and nRF52832.
1) I am seeing below statement in Product specification of nRF52840 under section “7.1 Pin assignments”. What does this mean...
Hi Nordic. I am using nrf mesh sdk v4.10 and an nrf52840.
I would like to report a potential bug regarding the Light LC server.
According to the mesh specification regarding...
Hello,
I have a strange Problem. I have a Central Application where the Central will get a TagID via Uart and if there is a adv. from this Tag the Central will connect to...
Hi Team,
We are using MBN52832 Murata module in our ongoing project.We need technical support from the team.
We need hardware integration (connection) support from the...
Every once in a while I am experiencing the soft device error NRF_FAULT_ID_SD_ASSERT.
In this post I saw that you may be able to provide some information on what is going...
Hello everyone,
I work with a custom board with the nRF52840 chip on it. We have pressure, humidity and temperature sensor and accelerometer sensor on the board. We need...
Hi,
We have a product that have a BLE capability (not by Nordic) and already have a mobile app that works with it.
I am developing now the FW for the upgraded version...
